Skip to content

enable Intel Alderlake RST VMD configuration

Oldřich Jedlička linux-raid 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest1 patch 10 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/1mdadm: enable Intel Alderlake RST VMD configurationplatform-intel.c+12 -710 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/1] enable Intel Alderlake RST VMD configuration

Hi,

I was testing RAID 0 on my Dell Precision 3570 with Intel i7-1255U Alderlake processor. The mdadm tool did not work initially (the RAID was not recognised), but I was able to get the RAID working when I simply set IMSM_NO_PLATFORM=1. Then I tracked the issue down to UEFI variables and discovered that the platform newly uses the 'RstVmdV' name. This exactly same variable was used in recent patch series called "mdadm-CI for-jes/20220728", so I updated the code to recognise the new variable name also for VMD controller case. I then verified the change by first running it in a debugger and then by putting it to initrd on Fedora 36 (kernel 5.17). The startup was fine, the RAID 0 was correctly setup.

I based my work on top of "mdadm-CI for-jes/20220728" patch series, it is required in order to apply the patch.

Regards,
Oldrich.

Oldřich Jedlička (1):
mdadm: enable Intel Alderlake RST VMD configuration

 platform-intel.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)
Signature · 1 line
2.37.1