Skip to content

rockchip-dsi for rk3568

Chris Morgan linux-devicetree linux-phy linux-rockchip 4 versions – Applied

Status from this message: Applied, thanks!

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v4 Latest3 patches 4 repliesApplied
  2. v33 patches 5 repliesSuperseded
  3. v25 patches 7 repliesApplied
Earlier versions · 1
VersionPostedPatchesRepliesStatus
v1 RFC4 patches4 repliesSuperseded

Changes in v4 from the cover letter

- Added labels to bindings in rk356x.dtsi file to make it easier to reference in board dts files.

Patches in v4 Applied

#Subject and filesSizeRepliesApplied
1/3dt-bindings: phy-rockchip-inno-dsidphy: add compatible for rk3568Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml+1 -00 replies
2/3phy/rockchip: inno-dsidphy: Add support for rk3568drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c+158 -460 replies
3/3arm64: dts: rockchip: Add DSI and DSI-DPHY nodes to rk356xarch/arm64/boot/dts/rockchip/rk356x.dtsi+80 -01 reply

Reviews trailers per patch

2 of 3 patches have a Reviewed-by or Acked-by.

PatchRob HerringHeiko StuebnerMichael Riesch
1/3A-b R-b
2/3
3/3A-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes. Scroll the table sideways for all 3 reviewers.

Read the v4 thread

Cover letter [PATCH v4 0/3] rockchip-dsi for rk3568

From: Chris Morgan <[email protected]>

This series adds support for the dsi and dphy controllers on the Rockchip RK3568.

Tested on an Anbernic RG503, Anbernic RG353P, and Odroid Go Advance.

Changes since V3:
- Added labels to bindings in rk356x.dtsi file to make it easier to reference in board dts files.

Changes since V2:
- Removed dsi controller patches, as those have been merged upstream.
- Removed notes about rolling back clock drivers. If I set the parent clock of the VOP port I'm using to VPLL and set the clock rate of PLL_VPLL to 500MHz this series works correctly for my panels without rolling anything back (per Heiko this is the correct way).
- Added additional details about refactoring DPHY driver to add 2.5GHz for rk356x. All other devices still have a max speed of 1GHz.
- Notified Heiko that the BIT(5) for both PLL_POST_DIV_ENABLE and PLL_POST_DIV_ENABLE_MASK is deliberate, because of how the phy_update_bits() works.

Changes since RFCv1:
- Identified cause of image shift (clock changes).
- Noted that driver works now.
- Added devicetree nodes for rk356x.dtsi.

Chris Morgan (3):
dt-bindings: phy-rockchip-inno-dsidphy: add compatible for rk3568 phy/rockchip: inno-dsidphy: Add support for rk3568
arm64: dts: rockchip: Add DSI and DSI-DPHY nodes to rk356x

 .../bindings/phy/rockchip,px30-dsi-dphy.yaml  |   1 +
 arch/arm64/boot/dts/rockchip/rk356x.dtsi      |  80 +++++++
 .../phy/rockchip/phy-rockchip-inno-dsidphy.c  | 204 ++++++++++++++----
 3 files changed, 239 insertions(+), 46 deletions(-)
Signature · 1 line
2.25.1