Skip to content

add interface mode select and RMII

[email protected] linux-devicetree lkml netdev 2 versions – Applied

Status from this message: This series was applied to netdev/net-next.git (master)

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest2 patches 1 replyApplied 2/2
  2. v12 patches 7 repliesSuperseded

Patches in v2 All 2 applied

#Subject and filesSizeRepliesApplied
1/2dt-bindings: net: tja11xx: add nxp,refclk_in propertyDocumentation/devicetree/bindings/net/nxp,tja11xx.yaml+17 -01 replyApplied
2/2net: phy: tja11xx: add interface mode and RMII REF_CLK supportdrivers/net/phy/nxp-tja11xx.c+78 -50 repliesApplied

Reviews trailers per patch

1 of 2 patches has a Reviewed-by or Acked-by.

PatchRob Herring
1/2A-b
2/2

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v2 thread

Cover letter [PATCH V2 net-next 0/2] add interface mode select and RMII

From: Wei Fang <[email protected]>

The patches add the below feature support for both TJA1100 and TJA1101 PHYs cards:
- Add MII and RMII mode support.
- Add REF_CLK input/output support for RMII mode.

Wei Fang (2):
dt-bindings: net: tja11xx: add nxp,refclk_in property
net: phy: tja11xx: add interface mode and RMII REF_CLK support

 .../devicetree/bindings/net/nxp,tja11xx.yaml  | 17 ++++
 drivers/net/phy/nxp-tja11xx.c                 | 83 +++++++++++++++++--
 2 files changed, 95 insertions(+), 5 deletions(-)
Signature · 1 line
2.25.1