NXP LS1028A DT changes for multiple switch CPU ports
Status from this message: Applied all, thanks!
Get series with b4
b4 am [email protected]Versions newest first
Patches in v2 Applied
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/3 | arm64: dts: ls1028a: move DSA CPU port property to the common SoC dtsiarch/ arch/ arch/ +1 more | +1 | 0 replies | |
| 2/3 | arm64: dts: ls1028a: mark enetc port 3 as a DSA master tooarch/ | +1 | 1 reply | |
| 3/3 | arm64: dts: ls1028a: enable swp5 and eno3 for all boardsarch/ arch/ arch/ | +24 | 0 replies |
Reviews trailers per patch
All 3 patches have a Reviewed-by or Acked-by.
| Patch | Michael Walle |
|---|---|
| 1/3 | A-b |
| 2/3 | R-b |
| 3/3 | A-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH v2 devicetree 0/3] NXP LS1028A DT changes for multiple switch CPU ports
The Ethernet switch embedded within the NXP LS1028A has 2 Ethernet ports towards the host, for local packet termination. In current device trees, only the first port is enabled. Enabling the second port allows having a higher termination throughput.
Care has been taken that this change does not produce regressions when using updated device trees with old kernels that do not support multiple DSA CPU ports. The only difference for old kernels will be the appearance of a new net device (for &enetc_port3) which will not be very useful for much of anything.
Vladimir Oltean (3):
arm64: dts: ls1028a: move DSA CPU port property to the common SoC dtsi
arm64: dts: ls1028a: mark enetc port 3 as a DSA master too
arm64: dts: ls1028a: enable swp5 and eno3 for all boards
.../dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts | 9 ++++++++- .../boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts | 9 ++++++++- arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 9 ++++++++- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 2 ++ 4 files changed, 26 insertions(+), 3 deletions(-)
Signature · 1 line
2.34.1