drm/panel: Add Samsung AMS495QA01 Panel
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
- v4 Latest3 patches 7 repliesIn review
- v32 patches 1 replySuperseded
- v22 patches 4 repliesSuperseded
Earlier versions · 1
| Version | Posted | Patches | Replies | Status |
|---|---|---|---|---|
| v1 | 2 patches | 2 replies | Superseded |
Changes in v4 from the cover letter
- Updated documentation to add spi-peripheral-props.yaml per updates
made for similar devices. Note that I removed a "Reviewed-by" tag
from Rob Herring since this change probably needs to be confirmed.
- Added binding for RG503, since this device is now accepted with this
request: https://lore.kernel.org/linux-rockchip/[email protected]/
Patches in v4 No applies recorded yet
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/3 | dt-bindings: display: panel: Add Samsung AMS495QA01Documentation/ | +57 | 2 replies | |
| 2/3 | drm/panel: Add Samsung AMS495QA01 MIPI-DSI LCD paneldrivers/ drivers/ drivers/ | +558 | 5 replies | |
| 3/3 | arm64: dts: rockchip: add display to RG503arch/ | +61 | 0 replies |
Reviews trailers per patch
1 of 3 patches has a Reviewed-by or Acked-by.
| Patch | Rob Herring | Linus Walleij |
|---|---|---|
| 1/3 | R-b | R-b |
| 2/3 | ||
| 3/3 |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH V4 0/3] drm/panel: Add Samsung AMS495QA01 Panel
From: Chris Morgan <[email protected]>
Add the Samsung AMS495QA01 panel as found on the Anbernic RG503. This panel uses DSI to receive video signals, but 3-wire SPI to receive command signals.
Changes since V3:
- Updated documentation to add spi-peripheral-props.yaml per updates
made for similar devices. Note that I removed a "Reviewed-by" tag
from Rob Herring since this change probably needs to be confirmed.
- Added binding for RG503, since this device is now accepted with this
request: https://lore.kernel.org/linux-rockchip/[email protected]/
Changes since V2:
- Added 50hz mode at request of userspace devs.
- Renamed "dupa" to panel name. Good catch Maya.
- Added Maya's Signed-off-by.
- Removed check for max backlight, since it is already done by backlight_device_set_brightness.
- Fixed minor formatting issues on devicetree binding documentation and added port to provided example.
Changes since V1:
- Removed errant reference to backlight in documentation. This is an OLED panel.
- Made elvss regulator optional. In my case its hard wired and not controllable.
- Added "prepared" enum to track panel status to prevent unbalanced regulator enable/disable.
Chris Morgan (3):
dt-bindings: display: panel: Add Samsung AMS495QA01 drm/panel: Add Samsung AMS495QA01 MIPI-DSI LCD panel
arm64: dts: rockchip: add display to RG503
.../display/panel/samsung,ams495qa01.yaml | 57 ++ .../dts/rockchip/rk3566-anbernic-rg503.dts | 61 ++ drivers/gpu/drm/panel/Kconfig | 10 + drivers/gpu/drm/panel/Makefile | 1 + .../gpu/drm/panel/panel-samsung-ams495qa01.c | 547 ++++++++++++++++++ 5 files changed, 676 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,ams495qa01.yaml create mode 100644 drivers/gpu/drm/panel/panel-samsung-ams495qa01.c
Signature · 1 line
2.25.1