Skip to content

add support for Theobroma Systems PX30-µQ7 (Ringneck) with Haikou devkit

Quentin Schulz linux-arm-kernel linux-devicetree linux-rockchip lkml 2 versions – Applied

Status from this message: Applied, thanks!

Get series with b4
b4 am 20220930-upstream-ringneck-v2-0-6671694b6934@theobroma-systems.com change-id 20220930-upstream-ringneck-6cef0c09cd86

Versions newest first · linked by author and title

  1. v2 Latest2 patches 1 replyApplied
  2. v13 patches 14 repliesSuperseded

Changes in v2 from the cover letter · 18 lines

- changed GPIO used for sleep and wake buttons since v1.2 HW rework (v1.1 was engineering sample),
- changed GPIO used for PHY reset since v1.2 HW rework (v1.1 was engineering sample),
- enabled saradc used for module voltage feedback and module HW version identifier,
- updated vccio_sd for 1.8V-3.3V operation instead of forced 3V,
- enabled SDR12, SDR25 and SDR50 for SD card controller,
- added vqmmc supply for SD card controller,
- removed SW_BOOT_ALT addition to the input SW events in favor of a GPIO input hog,
- renamed model property in DT to use u instead of µ since dtc didn't like it,
- renamed haikou-keys DT node name into gpio-keys to match DT standard expectation,
- renamed gpio-keys entries with lowercase and dash characters only,
- added button- or switch- prefix for gpio-keys,
- removed label for GPIO LEDs in favor of function and color properties,
- renamed regulator DT node names to be suffixed with -regulator as per DT standard expectation,
- added GPIO hog for BIOS_DISABLE/BOOT_ALT override pin (makes sure that the lines to eMMC and SPI-flashes are working even if the hardware switch disabled them at boot),
- renamed pmic_int DT node name into pmic-int,
- removed a couple of redundant status = okay,
- added Acked-By for dt-bindings,
- replaced µ with u in dt-bindings description just for consistency,

Patches in v2 Applied

#Subject and filesSizeRepliesApplied
1/2arm64: dts: rockchip: add PX30-µQ7 (Ringneck) SoM with Haikou baseboardarch/arm64/boot/dts/rockchip/Makefile arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi+615 -00 replies
2/2dt-bindings: arm: rockchip: add Theobroma Systems PX30-µQ7 (Ringneck) with HaikouDocumentation/devicetree/bindings/arm/rockchip.yaml+5 -00 replies

Reviews trailers per patch

1 of 2 patches has a Reviewed-by or Acked-by.

PatchKrzysztof Kozlowski
1/2
2/2A-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v2 thread

Cover letter [PATCH v2 0/2] add support for Theobroma Systems PX30-µQ7 (Ringneck) with Haikou devkit

From: Quentin Schulz <[email protected]>

The PX30-uQ7 (Ringneck) SoM is a µQseven-compatible (40mmx70mm, MXM-230 connector) system-on-module from Theobroma Systems[1], featuring the Rockchip PX30.

It provides the following feature set:
* up to 4GB DDR4
* up to 128GB on-module eMMC (with 8-bit 1.8V interface)
* SD card (on a baseboard) via edge connector
* Fast Ethernet with on-module TI DP83825I PHY
* MIPI-DSI/LVDS
* MIPI-CSI
* USB
- 1x USB 2.0 dual-role
- 3x USB 2.0 host
* on-module STM32 Cortex-M0 companion controller, implementing:
- low-power RTC functionality (ISL1208 emulation)
- fan controller (AMC6821 emulation)
- USB<->CAN bridge controller
* on-module Espressif ESP32 for Bluetooth + 2.4GHz WiFi
* on-module NXP SE05x Secure Element

[1] https://www.theobroma-systems.com/som-product/px30-%C2%B5q7/

The Espressif ESP32 support is not added in this patch series as there'll be some challenges around the Device Tree bindings that will require its own patch series and discussion.

MIPI-DSI/CSI "consumers" will come later with an adapter board once it is designed.

Cheers,
Quentin

v2:
- changed GPIO used for sleep and wake buttons since v1.2 HW rework (v1.1 was engineering sample),
- changed GPIO used for PHY reset since v1.2 HW rework (v1.1 was engineering sample),
- enabled saradc used for module voltage feedback and module HW version identifier,
- updated vccio_sd for 1.8V-3.3V operation instead of forced 3V,
- enabled SDR12, SDR25 and SDR50 for SD card controller,
- added vqmmc supply for SD card controller,
- removed SW_BOOT_ALT addition to the input SW events in favor of a GPIO input hog,
- renamed model property in DT to use u instead of µ since dtc didn't like it,
- renamed haikou-keys DT node name into gpio-keys to match DT standard expectation,
- renamed gpio-keys entries with lowercase and dash characters only,
- added button- or switch- prefix for gpio-keys,
- removed label for GPIO LEDs in favor of function and color properties,
- renamed regulator DT node names to be suffixed with -regulator as per DT standard expectation,
- added GPIO hog for BIOS_DISABLE/BOOT_ALT override pin (makes sure that the lines to eMMC and SPI-flashes are working even if the hardware switch disabled them at boot),
- renamed pmic_int DT node name into pmic-int,
- removed a couple of redundant status = okay,
- added Acked-By for dt-bindings,
- replaced µ with u in dt-bindings description just for consistency,

To: Rob Herring <[email protected]>
To: Krzysztof Kozlowski <[email protected]>
To: Heiko Stuebner <[email protected]>

---
Quentin Schulz (2):
arm64: dts: rockchip: add PX30-µQ7 (Ringneck) SoM with Haikou baseboard
dt-bindings: arm: rockchip: add Theobroma Systems PX30-µQ7 (Ringneck) with Haikou

 .../devicetree/bindings/arm/rockchip.yaml          |   5 +
 arch/arm64/boot/dts/rockchip/Makefile              |   1 +
 .../boot/dts/rockchip/px30-ringneck-haikou.dts     | 232 +++++++++++++
 arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi    | 382 +++++++++++++++++++++
 4 files changed, 620 insertions(+)

---
base-commit: 26cd4fe5a20016bed96fce28e19115f238ce3a36
change-id: 20220930-upstream-ringneck-6cef0c09cd86

Best regards,

Signature · 6 lines
Quentin Schulz <[email protected]>

_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip