Skip to content

TI J7x Disable Incomplete DT Nodes

Andrew Davis linux-arm-kernel linux-devicetree lkml 1 version Applied

Status from this message: I have applied the following to branch ti-k3-dts-next on [1].

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest12 patches 3 repliesApplied

Patches in v1 Applied

#Subject and filesSizeRepliesApplied
1/12arm64: dts: ti: k3-j721e: Enable UART nodes at the board levelarch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts arch/arm64/boot/dts/ti/k3-j721e-main.dtsi arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi +1 more+37 -570 replies
2/12arm64: dts: ti: k3-j721e: Enable I2C nodes at the board levelarch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts arch/arm64/boot/dts/ti/k3-j721e-main.dtsi arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi +1 more+17 -200 replies
3/12arm64: dts: ti: k3-j721e: Enable MCASP nodes at the board levelarch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts arch/arm64/boot/dts/ti/k3-j721e-main.dtsi arch/arm64/boot/dts/ti/k3-j721e-sk.dts+13 -1040 replies
4/12arm64: dts: ti: k3-j721e: Enable MCAN nodes at the board levelarch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts arch/arm64/boot/dts/ti/k3-j721e-main.dtsi arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi+20 -480 replies
5/12arm64: dts: ti: k3-j7200: Enable UART nodes at the board levelarch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts arch/arm64/boot/dts/ti/k3-j7200-main.dtsi arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi+23 -350 replies
6/12arm64: dts: ti: k3-j7200: Enable I2C nodes at the board levelarch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts arch/arm64/boot/dts/ti/k3-j7200-main.dtsi arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi+12 -00 replies
7/12arm64: dts: ti: k3-j721s2: Enable UART nodes at the board levelarch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi+16 -340 replies
8/12arm64: dts: ti: k3-j721e: Enable Mailbox nodes at the board levelarch/arm64/boot/dts/ti/k3-j721e-main.dtsi arch/arm64/boot/dts/ti/k3-j721e-sk.dts arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi+22 -560 replies
9/12arm64: dts: ti: k3-j7200: Enable Mailbox nodes at the board levelarch/arm64/boot/dts/ti/k3-j7200-main.dtsi arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi+14 -400 replies
10/12arm64: dts: ti: k3-j721s2: Enable Mailbox nodes at the board levelarch/arm64/boot/dts/ti/k3-j721s2-main.dtsi arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi+24 -960 replies
11/12arm64: dts: ti: k3-j721s2: Enable MCAN nodes at the board levelarch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi +1 more+23 -680 replies
12/12arm64: dts: ti: k3-j721s2: Enable I2C nodes at the board levelarch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi +1 more+10 -240 replies

Reviews trailers per patch

None of the 12 patches has a Reviewed-by or Acked-by of their own; the series has one for all of them.

PatchBryan BrattlofVignesh Raghavendra
SeriesR-b A-b
1/12
2/12
3/12
4/12
5/12
6/12
7/12
8/12
9/12
10/12
11/12
12/12

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 00/12] TI J7x Disable Incomplete DT Nodes

Hello all,

Same story as for AM64x[0] and AM62x[1], this time for J7x.

This one was a little more involved that the last 2 rounds as some IP (like UART) are pinned out using the default pinmux. Perhaps we should be explicit here and have pinmux nodes that simply restate the defaults. I can go solve that in a follow up series if we think that is what we want to do.

I have the last round for AM65x ready to post, but that involves a few boards that I do not have (Simatic IOT2050) but would like to do some additional re-work with, so holding off until after I get that sorted.

Thanks,
Andrew

[0] https://www.spinics.net/lists/arm-kernel/msg1018532.html
[1] https://www.spinics.net/lists/arm-kernel/msg1018864.html

Andrew Davis (12):
arm64: dts: ti: k3-j721e: Enable UART nodes at the board level
arm64: dts: ti: k3-j721e: Enable I2C nodes at the board level
arm64: dts: ti: k3-j721e: Enable MCASP nodes at the board level
arm64: dts: ti: k3-j721e: Enable MCAN nodes at the board level
arm64: dts: ti: k3-j7200: Enable UART nodes at the board level
arm64: dts: ti: k3-j7200: Enable I2C nodes at the board level
arm64: dts: ti: k3-j721s2: Enable UART nodes at the board level
arm64: dts: ti: k3-j721e: Enable Mailbox nodes at the board level
arm64: dts: ti: k3-j7200: Enable Mailbox nodes at the board level
arm64: dts: ti: k3-j721s2: Enable Mailbox nodes at the board level
arm64: dts: ti: k3-j721s2: Enable MCAN nodes at the board level
arm64: dts: ti: k3-j721s2: Enable I2C nodes at the board level

 .../dts/ti/k3-j7200-common-proc-board.dts     |  48 ++----
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi     |  29 ++++
 .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi      |   5 +
 arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi   |  42 +----
 .../dts/ti/k3-j721e-common-proc-board.dts     | 141 +++-------------
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi     |  55 ++++++
 .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi      |   7 +
 arch/arm64/boot/dts/ti/k3-j721e-sk.dts        | 158 ++----------------
 arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi   |  33 +---
 .../dts/ti/k3-j721s2-common-proc-board.dts    | 132 +--------------
 arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi    |  58 +++++++
 .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     |   7 +
 arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi  |  98 +----------
 13 files changed, 231 insertions(+), 582 deletions(-)
Signature · 1 line
2.37.3