Skip to content

imx: kontron-sl-mx8mm: Remove LVDS board type and devicetrees

[email protected] u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v3 Latest19 patches 0 repliesNew

Patches in v3 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/19imx: kontron-sl-mx8mm: Remove LVDS board type and devicetrees+0 -00 replies
2/19imx: kontron-sl-mx8mm: Add support for loading from SPI NOR in SPL+0 -00 replies
3/19imx: kontron-sl-mx8mm: Remove custom board_boot_order() workaround+0 -00 replies
4/19imx: kontron-sl-mx8mm: Increase CONFIG_SYS_CBSIZE to 2K+0 -00 replies
5/19imx: kontron-sl-mx8mm: Enable MTD command+0 -00 replies
6/19imx: kontron-sl-mx8mm: Add redundant environment and SPI NOR partitions+0 -00 replies
7/19imx: kontron-sl-mx8mm: Enable environment in MMC+0 -00 replies
8/19imx: kontron-sl-mx8mm: Migrate to use CONFIG_EXTRA_ENV_TEXT+0 -00 replies
9/19imx: kontron-sl-mx8mm: Enable bootaux command+0 -00 replies
10/19imx: kontron-sl-mx8mm: lpddr4_timing.c: Add spaces for proper alignment+0 -00 replies
11/19imx: kontron-sl-mx8mm: Remove 100mt DDR setpoint+0 -00 replies
12/19imx: kontron-sl-mx8mm: Use new LPDDR4 config parameters+0 -00 replies
13/19imx: kontron-sl-mx8mm: Prepare for other i.MX8MM SoM types+0 -00 replies
14/19imx: kontron-sl-mx8mm: Adjust devicetree names, compatibles and model strings+0 -00 replies
15/19imx: kontron-sl-mx8mm: Use the VSELECT signal to switch SD card IO voltage+0 -00 replies
16/19imx: kontron-sl-mx8mm: Use voltage rail names from schematic for PMIC regulator-names+0 -00 replies
17/19imx: kontron-sl-mx8mm: Simplify code in spl.c+0 -00 replies
18/19imx: kontron-sl-mx8mm: Add support for Kontron Electronics SoM SL i.MX8MM OSM-S+0 -00 replies
19/19imx: kontron-sl-mx8mm: Prepare for I2C display detection in environment script+0 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.

Read the v3 thread