Skip to content

xhci fixes for usb-linus

Mathias Nyman linux-usb stable 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest4 patches 3 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/4usb: xhci: add XHCI_SPURIOUS_SUCCESS to ASM1042 despite being a V0.96 controllerdrivers/usb/host/xhci-pci.c+7 -10 replies
2/4xhci: Add quirk to reset host back to default state at shutdowndrivers/usb/host/xhci-pci.c drivers/usb/host/xhci.c drivers/usb/host/xhci.h+13 -23 replies
3/4xhci-pci: Set runtime PM as default policy on all xHC 1.2 or later devicesdrivers/usb/host/xhci-pci.c+4 -280 replies
4/4xhci: Remove device endpoints from bandwidth list when freeing the devicedrivers/usb/host/xhci-mem.c+12 -80 replies

Reviews trailers per patch

1 of 4 patches has a Reviewed-by or Acked-by.

PatchMika WesterbergMarek Marczykowski-Górecki
1/4
2/4
3/4R-b
4/4T-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/4] xhci fixes for usb-linus

Hi Greg

Some xhci fixes for usb-linus, mostly tuning quirks, but also fixing one linked list issue.

Thanks
Mathias

Jens Glathe (1):
usb: xhci: add XHCI_SPURIOUS_SUCCESS to ASM1042 despite being a V0.96
controller

Mario Limonciello (1):
xhci-pci: Set runtime PM as default policy on all xHC 1.2 or later
devices

Mathias Nyman (2):
xhci: Add quirk to reset host back to default state at shutdown
xhci: Remove device endpoints from bandwidth list when freeing the
device

 drivers/usb/host/xhci-mem.c | 20 ++++++++++-------
 drivers/usb/host/xhci-pci.c | 44 +++++++++++++------------------------
 drivers/usb/host/xhci.c     | 10 +++++++--
 drivers/usb/host/xhci.h     |  1 +
 4 files changed, 36 insertions(+), 39 deletions(-)
Signature · 1 line
2.25.1