Skip to content

Add MSM8976 Device tree

Adam Skladowski linux-arm-msm linux-devicetree lkml phone-devel 2 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest1 patch 3 repliesIn review
  2. v11 patch 3 repliesSuperseded

Changes in v2 from the cover letter

================
1. Dropped l1 i/d cache from cpu nodes.
2. Replaced xo_board with rpmcc where possible.
3. Added base address to memory node.
4. Padded addresses to 8 digits.
5. Moved imem to mmio range.
6. Adjusted mdss te pin name.
7. Reorganized reg positions per Konrad's request.

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/1arm64: dts: qcom: Add MSM8976 device treearch/arm64/boot/dts/qcom/msm8976.dtsi+1310 -03 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [PATCH v2 0/1] Add MSM8976 Device tree

This patch introduce devicetree for MSM8976 SoC, most of already supported hardware should be described there. Note about v2:
Based on advice from Bjorn i decided to keep clocks container, this format appears in every other qcom dts.

Changes since v1
================
1. Dropped l1 i/d cache from cpu nodes.
2. Replaced xo_board with rpmcc where possible.
3. Added base address to memory node.
4. Padded addresses to 8 digits.
5. Moved imem to mmio range.
6. Adjusted mdss te pin name.
7. Reorganized reg positions per Konrad's request.

Adam Skladowski (1):
arm64: dts: qcom: Add MSM8976 device tree

 arch/arm64/boot/dts/qcom/msm8976.dtsi | 1310 +++++++++++++++++++++++++
 1 file changed, 1310 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/msm8976.dtsi
Signature · 1 line
2.25.1