Skip to content

Add USB Driver for HPE GXP Architecture

[email protected] linux-arm-kernel linux-devicetree linux-usb lkml oe-kbuild-all 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest7 patches 12 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/7usb: gadget: udc: gxp_udc: add gxp USB supportdrivers/usb/gadget/udc/Kconfig drivers/usb/gadget/udc/Makefile drivers/usb/gadget/udc/gxp_udc.c+1307 -00 replies
2/7dt-bindings: usb: hpe,gxp-udc: Add binding for gxp gadgetDocumentation/devicetree/bindings/usb/hpe,gxp-udc.yaml+57 -07 replies
3/7dt-bindings: usb: hpe,gxp-udcg: Add binding for gxp gadget groupDocumentation/devicetree/bindings/usb/hpe,gxp-udcg.yaml+34 -01 reply
4/7dt-bindings: usb: hpe,gxp-vuhc: add binding for gxp vEHCIDocumentation/devicetree/bindings/usb/hpe,gxp-vuhc.yaml+34 -01 reply
5/7ARM: dts: hpe: Add UDC nodesarch/arm/boot/dts/hpe-gxp.dtsi+30 -01 reply
6/7ARM: configs: multi_v7_defconfig: Enable HPE GXP USB Driverarch/arm/configs/multi_v7_defconfig+1 -01 reply
7/7MAINTAINERS: add USB support to GXPMAINTAINERS+5 -01 reply

Reviews trailers per patch

1 of 7 patches has a Reviewed-by or Acked-by.

PatchKrzysztof Kozlowski
1/7
2/7
3/7R-b
4/7
5/7
6/7
7/7

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH v1 0/7] Add USB Driver for HPE GXP Architecture

From: Richard Yu <[email protected]>

The GXP vEHCI controller presents an 8 port EHCI compatible PCI function to host software. Each EHCI port is logically connected to a corresponding set of virtual device registers.

Richard Yu (7):
usb: gadget: udc: gxp_udc: add gxp USB support
dt-bindings: usb: hpe,gxp-udc: Add binding for gxp gadget
dt-bindings: usb: hpe,gxp-udcg: Add binding for gxp gadget group
dt-bindings: usb: hpe,gxp-vuhc: add binding for gxp vEHCI
ARM: dts: hpe: Add UDC nodes
ARM: configs: multi_v7_defconfig: Enable HPE GXP USB Driver
MAINTAINERS: add USB support to GXP

 .../devicetree/bindings/usb/hpe,gxp-udc.yaml  |   57 +
 .../devicetree/bindings/usb/hpe,gxp-udcg.yaml |   34 +
 .../devicetree/bindings/usb/hpe,gxp-vuhc.yaml |   34 +
 MAINTAINERS                                   |    5 +
 arch/arm/boot/dts/hpe-gxp.dtsi                |   30 +
 arch/arm/configs/multi_v7_defconfig           |    1 +
 drivers/usb/gadget/udc/Kconfig                |    6 +
 drivers/usb/gadget/udc/Makefile               |    1 +
 drivers/usb/gadget/udc/gxp_udc.c              | 1300 +++++++++++++++++
 9 files changed, 1468 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/hpe,gxp-udc.yaml
 create mode 100644 Documentation/devicetree/bindings/usb/hpe,gxp-udcg.yaml
 create mode 100644 Documentation/devicetree/bindings/usb/hpe,gxp-vuhc.yaml
 create mode 100644 drivers/usb/gadget/udc/gxp_udc.c
Signature · 1 line
2.17.1