Skip to content

execmem_alloc for BPF programs

Song Liu bpf linux-mm 4 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v5 Latest6 patches 3 repliesIn review
  2. v46 patches 18 repliesSuperseded
  3. v36 patches 9 repliesSuperseded
Earlier versions · 1
VersionPostedPatchesRepliesStatus
v25 patches85 repliesSuperseded

Changes in v5 from the cover letter

1. Do not export execmem_* in normal build. (Christoph Hellwig)

Patches in v5 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/6vmalloc: introduce execmem_alloc, execmem_free, and execmem_fillinclude/linux/vmalloc.h mm/nommu.c mm/vmalloc.c+338 -00 replies
2/6x86/alternative: support execmem_alloc() and execmem_free()arch/x86/kernel/alternative.c+12 -00 replies
3/6selftests/vm: extend test_vmalloc to test execmem_* APIslib/test_vmalloc.c mm/vmalloc.c+47 -03 replies
4/6bpf: use execmem_alloc for bpf program and bpf dispatcherarch/x86/net/bpf_jit_comp.c include/linux/bpf.h include/linux/filter.h +2 more+21 -2010 replies
5/6vmalloc: introduce register_text_tail_vm()include/linux/vmalloc.h mm/vmalloc.c+38 -00 replies
6/6x86: use register_text_tail_vmDocumentation/x86/x86_64/mm.rst arch/x86/include/asm/pgtable_64_types.h arch/x86/mm/init_64.c+6 -30 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v5 yet.

Read the v5 thread

Cover letter [PATCH bpf-next v5 0/6] execmem_alloc for BPF programs

This patchset tries to address the following issues:

1. Direct map fragmentation

On x86, STRICT_*_RWX requires the direct map of any RO+X memory to be also RO+X. These set_memory_* calls cause 1GB page table entries to be split into 2MB and 4kB ones. This fragmentation in direct map results in bigger and slower page table, and pressure for both instruction and data TLB.

Our previous work in bpf_prog_pack tries to address this issue from BPF program side. Based on the experiments by Aaron Lu [4], bpf_prog_pack has greatly reduced direct map fragmentation from BPF programs.

2. iTLB pressure from BPF program

Dynamic kernel text such as modules and BPF programs (even with current bpf_prog_pack) use 4kB pages on x86, when the total size of modules and BPF program is big, we can see visible performance drop caused by high iTLB miss rate.

3. TLB shootdown for short-living BPF programs

Before bpf_prog_pack loading and unloading BPF programs requires global TLB shootdown. This patchset (and bpf_prog_pack) replaces it with a local TLB flush.

4. Reduce memory usage by BPF programs (in some cases)

Most BPF programs and various trampolines are small, and they often occupies a whole page. From a random server in our fleet, 50% of the loaded BPF programs are less than 500 byte in size, and 75% of them are less than 2kB in size. Allowing these BPF programs to share 2MB pages would yield some memory saving for systems with many BPF programs. For systems with only small number of BPF programs, this patch may waste a little memory by allocating one 2MB page, but using only part of it.

5. Introduce a unified API to allocate memory with special permissions.

This will help get rid of set_vm_flush_reset_perms calls from users of vmalloc, module_alloc, etc.

Based on our experiments [5], we measured ~0.6% performance improvement from bpf_prog_pack. This patchset further boosts the improvement to ~0.8%. The difference is because bpf_prog_pack uses 512x 4kB pages instead of 1x 2MB page, bpf_prog_pack as-is doesn't resolve #2 above.

This patchset replaces bpf_prog_pack with a better API and makes it available for other dynamic kernel text, such as modules, ftrace, kprobe.

This set enables bpf programs and bpf dispatchers to share huge pages with new API:
execmem_alloc()
execmem_alloc()
execmem_fill()

The idea is similar to Peter's suggestion in [1].

execmem_alloc() manages a set of PMD_SIZE RO+X memory, and allocates these memory to its users. execmem_alloc() is used to free memory allocated by execmem_alloc(). execmem_fill() is used to update memory allocated by execmem_alloc().

Memory allocated by execmem_alloc() is RO+X, so this doesnot violate W^X. The caller has to update the content with text_poke like mechanism. Specifically, execmem_fill() is provided to update memory allocated by execmem_alloc(). execmem_fill() also makes sure the update stays in the boundary of one chunk allocated by execmem_alloc(). Please refer to patch 1/6 for more details of

Patch 4/6 uses these new APIs in bpf program and bpf dispatcher.

Patch 5/6and 6/6 allows static kernel text (_stext to _etext) to share PMD_SIZE pages with dynamic kernel text on x86_64. This is achieved by allocating PMD_SIZE pages to roundup(_etext, PMD_SIZE), and then use _etext to roundup(_etext, PMD_SIZE) for dynamic kernel text.

[1] https://lore.kernel.org/bpf/[email protected]/
[2] RFC v1: https://lore.kernel.org/linux-mm/[email protected]/T/
[3] v1: https://lore.kernel.org/bpf/[email protected]/
[4] https://lore.kernel.org/bpf/Y2ioTodn+mBXdIqp@ziqianlu-desk2/
[5] https://lore.kernel.org/bpf/[email protected]/

Changes v4 => v5:
1. Do not export execmem_* in normal build. (Christoph Hellwig)

Changes v3 => v4:
1. Fixed a bug found with test_vmalloc.

Changes v2 => v3:
1. Add selftests in 4/6. (Luis Chamberlain)
2. Add more motivation and test results. (Luis Chamberlain)
3. Fix error handling in execmem_alloc().

Changes PATCH v1 => v2:
1. Rename the APIs as execmem_* (Christoph Hellwig)
2. Add more information about the motivation of this work (and follow up works in for kernel modules, various trampolines, etc). (Luis Chamberlain, Rick Edgecombe, Mike Rapoport, Aaron Lu)
3. Include expermential results from previous bpf_prog_pack and the community. (Aaron Lu, Luis Chamberlain, Rick Edgecombe)

Changes RFC v2 => PATCH v1:
1. Add vcopy_exec(), which updates memory allocated by vmalloc_exec(). It also ensures vcopy_exec() is only used to update memory from one single vmalloc_exec() call. (Christoph Hellwig)
2. Add arch_vcopy_exec() and arch_invalidate_exec() as wrapper for the text_poke() like logic.
3. Drop changes for kernel modules and focus on BPF side changes.

Changes RFC v1 => RFC v2:
1. Major rewrite of the logic of vmalloc_exec and vfree_exec. They now work fine with BPF programs (patch 1, 2, 4). But module side (patch 3) still need some work.

Song Liu (6):
vmalloc: introduce execmem_alloc, execmem_free, and execmem_fill x86/alternative: support execmem_alloc() and execmem_free() selftests/vm: extend test_vmalloc to test execmem_* APIs
bpf: use execmem_alloc for bpf program and bpf dispatcher
vmalloc: introduce register_text_tail_vm()
x86: use register_text_tail_vm

 Documentation/x86/x86_64/mm.rst         |   4 +-
 arch/x86/include/asm/pgtable_64_types.h |   1 +
 arch/x86/kernel/alternative.c           |  12 +
 arch/x86/mm/init_64.c                   |   4 +-
 arch/x86/net/bpf_jit_comp.c             |  23 +-
 include/linux/bpf.h                     |   3 -
 include/linux/filter.h                  |   5 -
 include/linux/vmalloc.h                 |   9 +
 kernel/bpf/core.c                       | 180 +-----------
 kernel/bpf/dispatcher.c                 |  11 +-
 lib/test_vmalloc.c                      |  35 +++
 mm/nommu.c                              |  12 +
 mm/vmalloc.c                            | 367 ++++++++++++++++++++++++
 13 files changed, 462 insertions(+), 204 deletions(-)

--
2.30.2