Skip to content

net: ipa: change GSI firmware load specification

Alex Elder linux-arm-msm linux-devicetree lkml netdev 3 versions – Applied

Status from this message: This series was applied to netdev/net-next.git (master)

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v3 Latest5 patches 0 repliesApplied 5/5
  2. v25 patches 3 repliesSuperseded
  3. v15 patches 5 repliesSuperseded

Patches in v3 All 5 applied

#Subject and filesSizeRepliesApplied
1/5dt-bindings: net: qcom,ipa: deprecate modem-initDocumentation/devicetree/bindings/net/qcom,ipa.yaml+55 -210 repliesApplied
2/5net: ipa: encapsulate decision about firmware loaddrivers/net/ipa/ipa_main.c+31 -80 repliesApplied
3/5net: ipa: introduce "qcom,gsi-loader" propertydrivers/net/ipa/ipa_main.c+37 -70 repliesApplied
4/5dt-bindings: net: qcom,ipa: support skipping GSI firmware loadDocumentation/devicetree/bindings/net/qcom,ipa.yaml+2 -00 repliesApplied
5/5net: ipa: permit GSI firmware loading to be skippeddrivers/net/ipa/ipa_main.c+12 -40 repliesApplied

Reviews trailers per patch

2 of 5 patches have a Reviewed-by or Acked-by.

PatchKrzysztof Kozlowski
1/5R-b
2/5
3/5
4/5R-b
5/5

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v3 thread

Cover letter [PATCH net-next v3 0/5] net: ipa: change GSI firmware load specification

Version 3 just adds reviewed-by tags for Krzysztof Kozlowski.

Version 2 of this series modifies the first patch only. One section in the description is reworded, and the example now consistenly describes the SC7180 SoC, both as suggested by Krzysztof.

Currently, GSI firmware must be loaded for IPA before it can be used--either by the modem, or by the AP. New hardware supports a third option, with the bootloader taking responsibility for loading GSI firmware. In that case, neither the AP nor the modem needs to do that.

The first patch in this series deprecates the "modem-init" Device Tree property in the IPA binding, using a new "qcom,gsi-loader" property instead. The second and third implement logic in the code to support either the "old" or the "new" way of specifying how GSI firmware is loaded.

The last two patches implement a new value for the "qcom,gsi-loader" property. If the value is "skip", neither the AP nor modem needs to load the GSI firmware. The first of these patches implements the change in the IPA binding; the second implements it in the code.

-Alex

Alex Elder (5):
dt-bindings: net: qcom,ipa: deprecate modem-init
net: ipa: encapsulate decision about firmware load
net: ipa: introduce "qcom,gsi-loader" property
dt-bindings: net: qcom,ipa: support skipping GSI firmware load
net: ipa: permit GSI firmware loading to be skipped

 .../devicetree/bindings/net/qcom,ipa.yaml     | 78 +++++++++++----
 drivers/net/ipa/ipa_main.c                    | 95 +++++++++++++++----
 2 files changed, 135 insertions(+), 38 deletions(-)
Signature · 1 line
2.34.1