Skip to content

add dt configuration for dp83867 led modes

Tim Harvey linux-arm-kernel linux-devicetree lkml netdev 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 13 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3dt-bindings: net: phy: dp83867: add LED mode propertyDocumentation/devicetree/bindings/net/ti,dp83867.yaml include/dt-bindings/net/ti-dp83867.h+22 -01 reply
2/3net: phy: dp83867: add LED mode configuration via dtdrivers/net/phy/dp83867.c+30 -20 replies
3/3arm64: dts: imx8m*-venice: add dp83867 PHY LED mode configurationarch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts+18 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/3] add dt configuration for dp83867 led modes

This series adds a dt-prop ti,led-modes to configure dp83867 PHY led modes, adds the code to implement it, and updates some board dt files to use the new property.

Tim Harvey (3):
dt-bindings: net: phy: dp83867: add LED mode property
net: phy: dp83867: add LED mode configuration via dt
arm64: dts: imx8m*-venice: add dp83867 PHY LED mode configuration

 .../devicetree/bindings/net/ti,dp83867.yaml   |  6 ++++
 .../dts/freescale/imx8mm-venice-gw700x.dtsi   |  6 ++++
 .../dts/freescale/imx8mm-venice-gw7902.dts    |  6 ++++
 .../dts/freescale/imx8mn-venice-gw7902.dts    |  6 ++++
 drivers/net/phy/dp83867.c                     | 32 +++++++++++++++++--
 include/dt-bindings/net/ti-dp83867.h          | 16 ++++++++++
 6 files changed, 70 insertions(+), 2 deletions(-)
Signature · 1 line
2.25.1