Skip to content

mtd: spi-nor: Extend SFDP to support additional octal modes as per latest JEDEC standard

Nathan Barrett-Morrison linux-mtd lkml llvm oe-kbuild-all 4 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v4 Latest3 patches 9 repliesIn review
  2. v33 patches 2 repliesSuperseded
  3. v23 patches 0 repliesSuperseded
Earlier versions · 1
VersionPostedPatchesRepliesStatus
v13 patches0 repliesSuperseded

Changes in v4 from the cover letter

- Remove SPI_NOR_OCTAL_READ_1_8_8, this was following a defunct path
- Correct the IS25LX256's missing BFPT info via a fixup instead

Patches in v4 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3mtd: spi-nor: Extend SFDP 4byte address instruction lookup table with new octal modes as per JEDEC JESD216Fdrivers/mtd/spi-nor/sfdp.c+5 -02 replies
2/3mtd: spi-nor: Add additional octal-mode page program flags to be checked during SFDP 4BAIT parsingdrivers/mtd/spi-nor/sfdp.c+8 -02 replies
3/3mtd: spi-nor: Add support for IS25LX256 operating in 1S-8S-8S octal read modedrivers/mtd/spi-nor/issi.c+32 -05 replies

Reviews trailers per patch

All 3 patches have a Reviewed-by or Acked-by.

PatchMichael Walle
1/3R-b
2/3R-b
3/3R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v4 thread

Cover letter [PATCH v4 0/3] mtd: spi-nor: Extend SFDP to support additional octal modes as per latest JEDEC standard

In the latest JEDEC standard (JESD216F), there are now bitfields in the 4 byte address instruction table for 1S-1S-8S and 1S-8S-8S modes.

This patchset adds support for checking the 4BAIT for these modes.

v2: Move page program commands into sfdp.c instead of core.c, as this appears to conform more closely with spi-nor paradigm. Page program buswidth appears to be automatically determined, so let's follow suit and do the same.

v3:
- Added missing SPI_NOR_OCTAL_READ_1_8_8 to spi_nor_sfdp check in spi_nor_init_params_deprecated()
- Convert IS25LX256 to 1S-8S-8S instead of 1S-1S-8S
- Tested and confirmed both 1S-1S-8S and 1S-8S-8S work on IS25LX256

v4:
- Remove SPI_NOR_OCTAL_READ_1_8_8, this was following a defunct path
- Correct the IS25LX256's missing BFPT info via a fixup instead

Nathan Barrett-Morrison (3):
mtd: spi-nor: Extend SFDP 4byte address instruction lookup table with
new octal modes as per JEDEC JESD216F
mtd: spi-nor: Add additional octal-mode page program flags to be
checked during SFDP 4BAIT parsing
mtd: spi-nor: Add support for IS25LX256 operating in 1S-8S-8S octal
read mode

 drivers/mtd/spi-nor/issi.c | 32 ++++++++++++++++++++++++++++++++
 drivers/mtd/spi-nor/sfdp.c | 13 +++++++++++++
 2 files changed, 45 insertions(+)
Signature · 1 line
2.30.2