Skip to content

fix the sdio device DATA/CMD CRC and Timeout issue after tuning

[email protected] linux-mmc 2 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v3 Latest2 patches 3 repliesIn review
  2. v23 patches 4 repliesSuperseded

Changes in v3 from the cover letter

- involve init_card() callback instead of change the common code.

Patches in v3 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2mmc: sdhci-esdhc-imx: simplify the auto tuning logicdrivers/mmc/host/sdhci-esdhc-imx.c+16 -91 reply
2/2mmc: sdhci-esdhc-imx: only enable DAT[0] and CMD line auto tuning for SDIO devicedrivers/mmc/host/sdhci-esdhc-imx.c+41 -01 reply

Reviews trailers per patch

All 2 patches have a Reviewed-by or Acked-by.

PatchAdrian Hunter
1/2A-b
2/2A-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v3 thread

Cover letter [PATCH v3 0/2] fix the sdio device DATA/CMD CRC and Timeout issue after tuning

From: Haibo Chen <[email protected]>

V3:
- involve init_card() callback instead of change the common code.

V2:
- drop the dts/dt-binding change, since this is one IC limitation, so handle this directlly in driver.
- simply the auto tuning code logic.
- To detect the SDIO device in host driver side, add some change

    in common code, move host->card = card a bit upper.

Haibo Chen (2):
mmc: sdhci-esdhc-imx: simplify the auto tuning logic
mmc: sdhci-esdhc-imx: only enable DAT[0] and CMD line auto tuning for
SDIO device

 drivers/mmc/host/sdhci-esdhc-imx.c | 66 ++++++++++++++++++++++++++----
 1 file changed, 57 insertions(+), 9 deletions(-)
Signature · 1 line
2.34.1