Bluetooth: Add support for RTL8821CS
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
- v5 Latest3 patches 4 repliesIn review 1 of 3 applied
- v43 patches 7 repliesApplied 3/3
- v33 patches 2 repliesSuperseded
Earlier versions · 2
| Version | Posted | Patches | Replies | Status |
|---|---|---|---|---|
| v2 | 3 patches | 3 replies | Superseded | |
| v1 RFC | 2 patches | 6 replies | Superseded |
Changes in v5 from the cover letter
- After extensive testing it was found that there are problems with using the bluetooth that were not caught with the initial testing. This can be mitigated by setting the "H5_INFO_WAKEUP_DISABLE" flag. The easiest way to accomplish that is to change the fallback compatible string to "realtek,rtl8723bs-bt". Updated the binding documentation and binding to reflect this. No change to the driver from V4 was necessary. Removed "reviewed-by" from documentation due to this change.
Patches in v5 1 of 3 applied
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/3 | dt-bindings: net: realtek-bluetooth: Add RTL8821CSDocumentation/ | +15 | 4 replies | |
| 2/3 | Bluetooth: hci_h5: btrtl: Add support for RTL8821CSdrivers/ | +8 | 0 replies | Applied |
| 3/3 | arm64: dts: rockchip: Update compatible for bluetootharch/ | +1 | 0 replies |
Reviews trailers per patch
1 of 3 patches has a Reviewed-by or Acked-by.
| Patch | Krzysztof Kozlowski |
|---|---|
| 1/3 | R-b |
| 2/3 | |
| 3/3 |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH 0/3 V5] Bluetooth: Add support for RTL8821CS
From: Chris Morgan <[email protected]>
This patch series is to add support for the RTL8821CS Bluetooth controller found on the RTL8821CS WiFi/Bluetooth combo chip.
This has been tested with firmware version 0x75b8f098 which has been submitted by Realtek for inclusion in linux-firmware.
https://lore.kernel.org/linux-firmware/[email protected]/
Changes from V4:
- After extensive testing it was found that there are problems with using the bluetooth that were not caught with the initial testing. This can be mitigated by setting the "H5_INFO_WAKEUP_DISABLE" flag. The easiest way to accomplish that is to change the fallback compatible string to "realtek,rtl8723bs-bt". Updated the binding documentation and binding to reflect this. No change to the driver from V4 was necessary. Removed "reviewed-by" from documentation due to this change.
Changes from V3:
- Corrected bindings so that all but the 8821 use enum, and 8821 uses items.
Changes from V2:
- Corrected devicetree documentation to change compatible from const back to enum.
- Removed "reviewed-by" from Alistair Francis as binding documentation updated with changes.
Changes from V1:
- Switched to use a fallback string for the rtl8822cs so as to not add an extra entry to the of_device_id table. The driver is capable of selecting the correct firmware blob to load.
- Updated the messages to note a new version of the firmware was tested and that Realtek has submitted this firmware upstream.
- Updated the devicetree node on the Anbernic RGxx3 series to use the fallback string of realtek,rtl8822cs-bt.
Chris Morgan (3):
dt-bindings: net: realtek-bluetooth: Add RTL8821CS
Bluetooth: hci_h5: btrtl: Add support for RTL8821CS
arm64: dts: rockchip: Update compatible for bluetooth
.../bindings/net/realtek-bluetooth.yaml | 24 ++++++++++++------- .../dts/rockchip/rk3566-anbernic-rgxx3.dtsi | 2 +- drivers/bluetooth/btrtl.c | 8 +++++++ 3 files changed, 24 insertions(+), 10 deletions(-)
Signature · 1 line
2.34.1