Skip to content

make e1000 work on MIPS

Denis Orlov barebox 1 version Applied

Status from this message: Applied, thanks

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 1 replyApplied

Patches in v1 Applied

#Subject and filesSizeRepliesApplied
1/2net: e1000: properly map dma allocationsdrivers/net/e1000/e1000.h drivers/net/e1000/main.c+6 -40 replies
2/2dma: use virt/phys conversions when no dma_offset is specifieddrivers/dma/map.c+10 -150 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/2] make e1000 work on MIPS

With these changes, e1000 driver now works on MIPS Malta in QEMU with the corresponding network controller attached:
-netdev user,tftp=/tftpboot,id=net0 -device e1000,netdev=net0

Antony Pavlov (1):
net: e1000: properly map dma allocations

Denis Orlov (1):
dma: use virt/phys conversions when no dma_offset is specified

 drivers/dma/map.c         | 25 ++++++++++---------------
 drivers/net/e1000/e1000.h |  2 ++
 drivers/net/e1000/main.c  |  8 ++++----
 3 files changed, 16 insertions(+), 19 deletions(-)
Signature · 1 line
2.30.2