Skip to content

Add DTS for BPI-R3

Frank Wunderlich u-boot 2 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest2 patches 4 repliesIn review
  2. v12 patches 1 replySuperseded

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2board: mediatek: add Bananapi-R3 devicetreearch/arm/dts/Makefile arch/arm/dts/mt7986a-bpi-r3-emmc.dts arch/arm/dts/mt7986a-bpi-r3-sd.dts+302 -01 reply
2/2configs: change bpi-r3 to board specific dts and change promptconfigs/mt7986a_bpir3_emmc_defconfig configs/mt7986a_bpir3_sd_defconfig+6 -61 reply

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [PATCH v2 0/2] Add DTS for BPI-R3

From: Frank Wunderlich <[email protected]>

Add board specific devicetree for BananaPi R3.

It is taken from openwrt
https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob;f=package/boot/uboot-mediatek/patches/430-add-bpi-r3.patch;hb=HEAD
only enabled the factory button which was disabled because a HW-bug in rev 1.0 of r3.

v2: changed label for wps-button (used as reset in openwrt)

Daniel Golle (1):
board: mediatek: add Bananapi-R3 devicetree

Frank Wunderlich (1):
configs: change bpi-r3 to board specific dts and change prompt

 arch/arm/dts/Makefile                |   2 +
 arch/arm/dts/mt7986a-bpi-r3-emmc.dts |  32 ++++
 arch/arm/dts/mt7986a-bpi-r3-sd.dts   | 268 +++++++++++++++++++++++++++
 configs/mt7986a_bpir3_emmc_defconfig |   6 +-
 configs/mt7986a_bpir3_sd_defconfig   |   6 +-
 5 files changed, 308 insertions(+), 6 deletions(-)
 create mode 100644 arch/arm/dts/mt7986a-bpi-r3-emmc.dts
 create mode 100644 arch/arm/dts/mt7986a-bpi-r3-sd.dts
Signature · 1 line
2.34.1