Skip to content

drm/bridge: dw_hdmi: allow to disable CEC from DT

Jernej Skrabec dri-devel linux-arm-kernel linux-devicetree linux-media linux-sunxi lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 6 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3dt-bindings: display: synopsys,dw-hdmi: Add property for disabling CECDocumentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml+5 -02 replies
2/3drm/bridge: dw_hdmi: Handle snps,disable-cec propertydrivers/gpu/drm/bridge/synopsys/dw-hdmi.c+3 -11 reply
3/3ARM: dts: sun8i: h3: beelink-x2: Disable DW-HDMI CECarch/arm/boot/dts/sun8i-h3-beelink-x2.dts+1 -03 replies

Reviews trailers per patch

1 of 3 patches has a Reviewed-by or Acked-by.

PatchRobert Foss
1/3
2/3R-b
3/3

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/3] drm/bridge: dw_hdmi: allow to disable CEC from DT

Boards can have perfectly working DW HDMI CEC implementation but they may prefer to use bit banged implementation instead. This is the situation on Beelink X2.

Add DW HDMI DT property for disabling CEC. This prevents confusion on userspace side by not exposing unused CEC interface.

Best regards,
Jernej

Jernej Skrabec (3):
dt-bindings: display: synopsys,dw-hdmi: Add property for disabling CEC drm/bridge: dw_hdmi: Handle snps,disable-cec property
ARM: dts: sun8i: h3: beelink-x2: Disable DW-HDMI CEC

 .../devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml | 5 +++++
 arch/arm/boot/dts/sun8i-h3-beelink-x2.dts                    | 1 +
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c                    | 4 +++-
 3 files changed, 9 insertions(+), 1 deletion(-)
Signature · 1 line
2.40.0