Skip to content

pcie: Allow atomic completion on PCIE root port

[email protected] qemu-devel 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest1 patch 4 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/1pcie: Allow generic PCIE root port to enable atomic completionhw/pci-bridge/gen_pcie_root_port.c hw/pci/pcie.c include/hw/pci/pcie_port.h+11 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/1] pcie: Allow atomic completion on PCIE root port

From: Robin Voetter <[email protected]>

The ROCm driver for Linux uses PCIe atomics to schedule work and generally communicate between the host and the device. This does not currently work in QEMU with regular vfio-pci passthrough, because the pcie-root-port does not advertise the PCIe atomic completer capabilities. When initializing the GPU from the Linux driver, it queries whether the PCIe connection from the CPU to GPU supports the required capabilities[1] in the pci_enable_atomic_ops_to_root function[2]. Currently the only part where this fails is checking the atomic completer capabilities (32 and 64 bits) on the root port[3]. In this case, the driver determines that PCIe atomics are not supported at all, and this causes ROCm programs to misbehave. (While AMD advertises that there is some support for ROCm without PCIe atomics, I have never actually gotten that working...)

This patch allows ROCm to properly function by introducing an additional experimental property to the pcie-root-port, x-atomic-completion. Setting this option makes the port report support for the PCI_EXP_DEVCAP2_ATOMIC_COMP32 and COMP64 capabilities. This then makes the check from [3] pass, and everything seems to work appropriately after that.

To verify that the capabilities are reported correctly, one can use lspci to check the capabilities of the root port: lspci -vvv -s <root port id> should show 32bit+ and 64bit+ capabilities in DevCap2 when x-atomic-completion is enabled. For example:

-device pcie-root-port,x-atomic-completion=true,id.pcie.1

The output of lspci should include the following for the pcie root port:

    AtomicOpsCap: 32bit+ 64bit+ 128bitCAS-

To verify that ROCm works, the following HIP program should be sufficient. The work is scheduled to the GPU by signaling a semaphore using atomic operations from the CPU side, which is completed on the GPU, and the GPU-side printf works by signaling a semaphore from the GPU that is completed on the CPU. It can be compiled using hipcc with 'hipcc -otest test.hip':

    #include <hip/hip_runtime.h>
    __global__ void test() {
        printf("hello, world\n");
    }
    int main() {
        test<<<dim3(1), dim3(1)>>>();
        hipDeviceSynchronize();
    }

Previously, or when x-atomic-completion is set to false, this program would simply hang. Additionally, a message along the lines of the following is printed to dmesg during boot if the GPU driver determines that atomics are not supported:

amdgpu 0000:01:00.0: amdgpu: PCIE atomic ops is not supported

When atomics are properly supported, the above program works as intended, and the previous dmesg message is of course not printed. For this I am using a simple machine setup using the following device options, with the GPU that im testing with of course on 03:00.0.

     -device pcie-root-port,x-atomic-completion=true,id=pcie.1
     -device vfio-pci,host=03:00.0,bus=pcie.1

This patch does not include any automatic detection whether the root port of the host supports the atomic completer capabilities, nor if any of the physical PCIe bridges between the CPU and GPU support atomic routing. The intention here is that the user should make sure that the host does support atomic completion on the root complex. See also some prior discussion[4]. I have run the full test suite of some ROCm
libraries: rocPRIM, rocRAND, hipRAND, hipCUB and rocThrust. All of the tests pass now, with some minor unrelated changes.

Kind regards,

Robin Voetter, Stream HPC

[1] https://github.com/torvalds/linux/blob/v6.2/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c#L3716
[2] https://github.com/torvalds/linux/blob/v6.2/drivers/pci/pci.c#L3781
[3] https://github.com/torvalds/linux/blob/v6.2/drivers/pci/pci.c#L3829
[4] https://lists.nongnu.org/archive/html/qemu-devel/2023-04/msg01815.html
---

Robin Voetter (1):
pcie: Allow generic PCIE root port to enable atomic completion

 hw/pci-bridge/gen_pcie_root_port.c | 2 ++
 hw/pci/pcie.c                      | 6 ++++++
 include/hw/pci/pcie_port.h         | 3 +++
 3 files changed, 11 insertions(+)

--
2.39.2