Skip to content

Fix the multi thread manner of NCSI driver

Delphine CC Chiu lkml netdev 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest1 patch 2 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/1net/ncsi: Fix the multi thread manner of NCSI drivernet/ncsi/internal.h net/ncsi/ncsi-manage.c net/ncsi/ncsi-rsp.c+55 -512 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH v1 0/1] Fix the multi thread manner of NCSI driver

Currently NCSI driver will send several NCSI commands back to back without waiting the response of previous NCSI command or timeout in some state when NIC have multi channel. This operation against the single thread manner defined by NCSI SPEC(section 6.3.2.3 in DSP0222_1.1.1).

1. Fix the problem of NCSI driver that sending command back to back without waiting the response of previos NCSI command or timeout to meet the single thread manner.
2. According to NCSI SPEC(section 6.2.13.1 in DSP0222_1.1.1), we should probe one channel at a time by sending NCSI commands (Clear initial state, Get version ID, Get capabilities...), than repeat this steps until the max number of channels which we got from NCSI command (Get capabilities) has been probed.

Delphine CC Chiu (1):
net/ncsi: Fix the multi thread manner of NCSI driver

 net/ncsi/internal.h    |   1 +
 net/ncsi/ncsi-manage.c | 101 +++++++++++++++++++++--------------------
 net/ncsi/ncsi-rsp.c    |   4 +-
 3 files changed, 55 insertions(+), 51 deletions(-)
Signature · 1 line
2.17.1