Skip to content

net: dsa: MT7530, MT7531, and MT7988 improvements

[email protected] linux-arm-kernel linux-mediatek lkml netdev stable 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest24 patches 9 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/24net: dsa: mt7530: fix corrupt frames using trgmii on 40 MHz XTAL MT7621drivers/net/dsa/mt7530.c+2 -20 replies
2/24net: dsa: mt7530: add missing @p5_interface to mt7530_priv descriptiondrivers/net/dsa/mt7530.h+2 -10 replies
3/24net: dsa: mt7530: use p5_interface_select as data type for p5_intf_seldrivers/net/dsa/mt7530.h+2 -21 reply
4/24net: dsa: mt7530: properly support MT7531AE and MT7531BEdrivers/net/dsa/mt7530-mdio.c drivers/net/dsa/mt7530.c drivers/net/dsa/mt7530.h+21 -355 replies
5/24net: dsa: mt7530: improve comments regarding port 5 and 6drivers/net/dsa/mt7530.c+13 -60 replies
6/24net: dsa: mt7530: read XTAL value from correct registerdrivers/net/dsa/mt7530.c+1 -10 replies
7/24net: dsa: mt7530: improve code path for setting up port 5drivers/net/dsa/mt7530.c+8 -110 replies
8/24net: dsa: mt7530: do not run mt7530_setup_port5() if port 5 is disableddrivers/net/dsa/mt7530.c+3 -60 replies
9/24net: dsa: mt7530: change p{5,6}_interface to p{5,6}_configureddrivers/net/dsa/mt7530.c drivers/net/dsa/mt7530.h+10 -190 replies
10/24net: dsa: mt7530: empty default case on mt7530_setup_port5()drivers/net/dsa/mt7530.c+1 -42 replies
11/24net: dsa: mt7530: call port 6 setup from mt7530_mac_config()drivers/net/dsa/mt7530.c+15 -60 replies
12/24net: dsa: mt7530: remove pad_setup function pointerdrivers/net/dsa/mt7530.c drivers/net/dsa/mt7530.h+2 -370 replies
13/24net: dsa: mt7530: move XTAL check to mt7530_setup()drivers/net/dsa/mt7530.c+10 -80 replies
14/24net: dsa: mt7530: move enabling port 6 to mt7530_setup_port6()drivers/net/dsa/mt7530.c+7 -30 replies
15/24net: dsa: mt7530: switch to if/else statements on mt7530_setup_port6()drivers/net/dsa/mt7530.c+11 -240 replies
16/24net: dsa: mt7530: set TRGMII RD TAP if trgmii is being useddrivers/net/dsa/mt7530.c+6 -50 replies
17/24net: dsa: mt7530: move lowering port 5 RGMII driving to mt7530_setup()drivers/net/dsa/mt7530.c+4 -40 replies
18/24net: dsa: mt7530: fix port capabilities for MT7988drivers/net/dsa/mt7530.c+1 -30 replies
19/24net: dsa: mt7530: remove .mac_port_config for MT7988 and make it optionaldrivers/net/dsa/mt7530.c+4 -140 replies
20/24net: dsa: mt7530: set interrupt register only for MT7530drivers/net/dsa/mt7530.c+1 -10 replies
21/24net: dsa: mt7530: force link-down on MACs before reset on MT7530drivers/net/dsa/mt7530.c+4 -00 replies
22/24net: dsa: mt7530: get rid of useless error returns on phylink code pathdrivers/net/dsa/mt7530.c drivers/net/dsa/mt7530.h+17 -660 replies
23/24net: dsa: mt7530: rename p5_intf_sel and use only for MT7530 switchdrivers/net/dsa/mt7530.c drivers/net/dsa/mt7530.h+32 -440 replies
24/24net: dsa: mt7530: run mt7530_pll_setup() only with 40 MHz XTALdrivers/net/dsa/mt7530.c+2 -10 replies

Reviews trailers per patch

8 of 24 patches have a Reviewed-by or Acked-by.

PatchBartel EerdekensArınç ÜNALDaniel Golle
1/24T-b T-b
2/24A-b
3/24A-b
4/24
5/24A-b
6/24T-b
7/24T-b
8/24T-b
9/24T-b A-b
10/24T-b
11/24T-b
12/24T-b A-b
13/24T-b
14/24T-b
15/24T-b
16/24T-b
17/24T-b
18/24A-b
19/24Co-authored-by
20/24A-b T-b
21/24T-b
22/24T-b A-b T-b
23/24
24/24T-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes. Scroll the table sideways for all 3 reviewers.

Read the v1 thread

Cover letter [PATCH net-next 00/24] net: dsa: MT7530, MT7531, and MT7988 improvements

Hello!

This patch series is focused on simplifying the code, and improving the logic of the support for MT7530, MT7531, and MT7988 SoC switches.

There're two fixes. One for fixing the corrupt frames using trgmii on MCM MT7530 with 40 MHz oscillator on certain MT7621 SoCs. The other for fixing the port capabilities of the switch on the MT7988 SoC.

Currently, using multiple ports as CPU ports won't work properly. I am working on fixing it.

I am leaving this information for the record, as I have not received any comments on my RFC series regarding this. The register may need to be protected from being accessed by processes while the operation that modifies the MT7530_MHWTRAP register on mt7530_setup_port6() is being done. I don't see this being done on mt7530_setup() but it's there on mt7530_setup_port5(). My tests haven't shown any apparent issues but if you experience any issues with port 6, this is where to look first.

I have done iperf3 and ping tests on all ports of the MT7530 switch with this patch series applied. I tested every possible configuration on the MCM and standalone MT7530 switch. I'll let the name of the dtb files speak for themselves.

MT7621 Unielec:

only-gmac0-mt7621-unielec-u7621-06-16m.dtb
rgmii-only-gmac0-mt7621-unielec-u7621-06-16m.dtb
only-gmac1-mt7621-unielec-u7621-06-16m.dtb
gmac0-and-gmac1-mt7621-unielec-u7621-06-16m.dtb
phy0-muxing-mt7621-unielec-u7621-06-16m.dtb
phy4-muxing-mt7621-unielec-u7621-06-16m.dtb
port5-as-user-mt7621-unielec-u7621-06-16m.dtb

tftpboot 0x80008000 mips-uzImage.bin; tftpboot 0x83000000 mips-rootfs.cpio.uboot; tftpboot 0x83f00000 $dtb; bootm 0x80008000 0x83000000 0x83f00000

MT7623 Bananapi:

only-gmac0-mt7623n-bananapi-bpi-r2.dtb
rgmii-only-gmac0-mt7623n-bananapi-bpi-r2.dtb
only-gmac1-mt7623n-bananapi-bpi-r2.dtb
gmac0-and-gmac1-mt7623n-bananapi-bpi-r2.dtb
phy0-muxing-mt7623n-bananapi-bpi-r2.dtb
phy4-muxing-mt7623n-bananapi-bpi-r2.dtb
port5-as-user-mt7623n-bananapi-bpi-r2.dtb

tftpboot 0x80008000 arm-uImage; tftpboot 0x83000000 arm-rootfs.cpio.uboot; tftpboot 0x83f00000 $dtb; bootm 0x80008000 0x83000000 0x83f00000

Arınç

Arınç ÜNAL (24):
net: dsa: mt7530: fix corrupt frames using trgmii on 40 MHz XTAL MT7621
net: dsa: mt7530: add missing @p5_interface to mt7530_priv description
net: dsa: mt7530: use p5_interface_select as data type for p5_intf_sel
net: dsa: mt7530: properly support MT7531AE and MT7531BE
net: dsa: mt7530: improve comments regarding port 5 and 6
net: dsa: mt7530: read XTAL value from correct register
net: dsa: mt7530: improve code path for setting up port 5
net: dsa: mt7530: do not run mt7530_setup_port5() if port 5 is disabled
net: dsa: mt7530: change p{5,6}_interface to p{5,6}_configured
net: dsa: mt7530: empty default case on mt7530_setup_port5()
net: dsa: mt7530: call port 6 setup from mt7530_mac_config()
net: dsa: mt7530: remove pad_setup function pointer
net: dsa: mt7530: move XTAL check to mt7530_setup()
net: dsa: mt7530: move enabling port 6 to mt7530_setup_port6()
net: dsa: mt7530: switch to if/else statements on mt7530_setup_port6()
net: dsa: mt7530: set TRGMII RD TAP if trgmii is being used
net: dsa: mt7530: move lowering port 5 RGMII driving to mt7530_setup()
net: dsa: mt7530: fix port capabilities for MT7988
net: dsa: mt7530: remove .mac_port_config for MT7988 and make it optional
net: dsa: mt7530: set interrupt register only for MT7530
net: dsa: mt7530: force link-down on MACs before reset on MT7530
net: dsa: mt7530: get rid of useless error returns on phylink code path
net: dsa: mt7530: rename p5_intf_sel and use only for MT7530 switch
net: dsa: mt7530: run mt7530_pll_setup() only with 40 MHz XTAL

 drivers/net/dsa/mt7530-mdio.c |   7 +-
 drivers/net/dsa/mt7530.c      | 372 +++++++++++++------------------------
 drivers/net/dsa/mt7530.h      |  35 ++--
 3 files changed, 145 insertions(+), 269 deletions(-)