Skip to content

smartpqi updates

Don Brace linux-scsi 1 version Applied

Status from this message: Applied to 6.5/scsi-staging, thanks!

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest12 patches 2 repliesApplied

Patches in v1 Applied

#Subject and filesSizeRepliesApplied
1/12smartpqi: map full length of PCI BAR 0drivers/scsi/smartpqi/smartpqi_init.c+1 -10 replies
2/12smartpqi: Add new controller PCI IDsdrivers/scsi/smartpqi/smartpqi_init.c+72 -00 replies
3/12smartpqi: remove null pointer checkdrivers/scsi/smartpqi/smartpqi_sas_transport.c+13 -150 replies
4/12smartpqi: fix-rare-sas-transport-mem-leakdrivers/scsi/smartpqi/smartpqi_sas_transport.c+3 -10 replies
5/12smartpqi: Remove contention for raid_bypass_cntdrivers/scsi/smartpqi/smartpqi.h drivers/scsi/smartpqi/smartpqi_init.c+4 -40 replies
6/12smartpqi: validate block layer host tagdrivers/scsi/smartpqi/smartpqi_init.c+2 -10 replies
7/12smartpqi: Add support for RAID NCQ prioritydrivers/scsi/smartpqi/smartpqi_init.c+45 -440 replies
8/12smartpqi: fix byte aligned writew for ARM serversdrivers/scsi/smartpqi/smartpqi_init.c+2 -20 replies
9/12smartpqi: stop sending driver initiated TURsdrivers/scsi/smartpqi/smartpqi.h drivers/scsi/smartpqi/smartpqi_init.c+11 -750 replies
10/12smartpqi: Add sysfs entry for numa node in /sys/block/sdX/device.drivers/scsi/smartpqi/smartpqi.h drivers/scsi/smartpqi/smartpqi_init.c+16 -00 replies
11/12smartpqi: update copyright to 2023drivers/scsi/smartpqi/Kconfig drivers/scsi/smartpqi/smartpqi.h drivers/scsi/smartpqi/smartpqi_init.c +3 more+6 -60 replies
12/12smartpqi: update version to 2.1.22-040drivers/scsi/smartpqi/smartpqi_init.c+3 -30 replies

Reviews trailers per patch

All 12 patches have a Reviewed-by or Acked-by.

PatchScott BeneshKevin BarnettScott TeelMike McGowenDavid StrahanGerry Morong
1/12R-b R-b
2/12R-b R-b R-b R-b
3/12R-b R-b R-b
4/12R-b R-b R-b R-b
5/12R-b R-b R-b
6/12R-b R-b R-b R-b
7/12R-b R-b R-b R-b
8/12R-b R-b R-b
9/12R-b R-b R-b
10/12R-b R-b R-b
11/12R-b R-b R-b
12/12R-b R-b R-b R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes. Scroll the table sideways for all 6 reviewers.

Read the v1 thread

Cover letter [PATCH 00/12] smartpqi updates

These patches are based on Martin Petersen's 6.4/scsi-queue tree
https://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi.git
6.4/scsi-queue

This set of changes consists of:

* Map entire BAR 0.
The driver was mapping up to and including the controller registers, but not all of BAR 0.
* Add PCI IDs to support new controllers.
* Clean up some code by removing unnecessary NULL checks.
This cleanup is a result of a Coverity report.
* Correct a rare memory leak whenever pqi_sas_port_add_rhpy() returns an error. This was Suggested by: Yang Yingliang <[email protected]>
* Remove atomic operations on variable raid_bypass_cnt. Accuracy is not required for driver operation. Change type from atomic_t to unsigned int.
* Correct a rare drive hot-plug removal issue where we get a NULL io_request. We added a check for this condition.
* Turn on NCQ priority for AIO requests to disks comprising RAID devices.
* Correct byte aligned writew() operations on some ARM servers. Changed the writew() to two writeb() operations.
* Change how the driver checks for a sanitize operation in progress. We were using TEST UNIT READY. We removed the TEST UNIT READY code and are now using the controller's firmware information in order to avoid issues caused by drives failing to complete TEST UNIT READY.
* Some customers have been requesting that we add the NUMA node to /sys/block/sd<scsi device>/device like the nvme driver does.
* Update the copyright information to match the current year.
* Bump the driver version to 2.1.22-040.

---

David Strahan (1):
smartpqi: Add new controller PCI IDs

Don Brace (5):
smartpqi: fix-rare-sas-transport-mem-leak
smartpqi: fix byte aligned writew for ARM servers
smartpqi: Add sysfs entry for numa node in /sys/block/sdX/device.
smartpqi: update copyright to 2023
smartpqi: update version to 2.1.22-040

Gilbert Wu (1):
smartpqi: Add support for RAID NCQ priority

Kevin Barnett (2):
smartpqi: remove null pointer check
smartpqi: stop sending driver initiated TURs

Mike McGowen (2):
smartpqi: map full length of PCI BAR 0
smartpqi: Remove contention for raid_bypass_cnt

Murthy Bhat (1):
smartpqi: validate block layer host tag

 drivers/scsi/smartpqi/Kconfig                 |   2 +-
 drivers/scsi/smartpqi/smartpqi.h              |   6 +-
 drivers/scsi/smartpqi/smartpqi_init.c         | 284 ++++++++++--------
 .../scsi/smartpqi/smartpqi_sas_transport.c    |  34 +--
 drivers/scsi/smartpqi/smartpqi_sis.c          |   2 +-
 drivers/scsi/smartpqi/smartpqi_sis.h          |   2 +-
 6 files changed, 178 insertions(+), 152 deletions(-)
Signature · 1 line
2.40.1.375.g9ce9dea4e1