Skip to content

arm64: dts: imx8mn/imx8mm-beacon: Add HDMI

Adam Ford linux-arm-kernel linux-devicetree lkml 4 versions – Applied

Status from this message: Applied all, thanks!

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v3 Latest posting 2/23 patches 2 repliesApplied
  2. v3 posting 1/23 patches 0 repliesSuperseded
  3. v22 patches 4 repliesSuperseded
Earlier versions · 1
VersionPostedPatchesRepliesStatus
v12 patches1 replySuperseded

Patches in v3 posting 2/2 Applied

#Subject and filesSizeRepliesApplied
1/3arm64: dts: imx8mn-beacon: Add HDMI video with soundarch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts+133 -00 replies
2/3arm64: dts: imx8mm-beacon: Change camera I2C addressarch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi+2 -20 replies
3/3arm64: dts: imx8mm-beacon: Add HDMI video with soundarch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts+131 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.

Read the v3 thread

Cover letter [PATCH V3 0/3] arm64: dts: imx8mn/imx8mm-beacon: Add HDMI

The DSI updates are in the DRM tree and Linux next with some updates that now allow the DSI to connect to an HDMI bridge and successfully sync displays at various resolutions and refresh rates.

V3: Alphabetize regulator names.
Add register names for EDID and Packet
Add I2C address change for the camera since it conflicted with the I2C address of the HDMI bridge.

V2: Make 'compatible' the first thing in the new nodes.

Adam Ford (3):
arm64: dts: imx8mn-beacon: Add HDMI video with sound
arm64: dts: imx8mm-beacon: Change camera I2C address
arm64: dts: imx8mm-beacon: Add HDMI video with sound

 .../freescale/imx8mm-beacon-baseboard.dtsi    |   4 +-
 .../boot/dts/freescale/imx8mm-beacon-kit.dts  | 131 +++++++++++++++++
 .../boot/dts/freescale/imx8mn-beacon-kit.dts  | 133 ++++++++++++++++++
 3 files changed, 266 insertions(+), 2 deletions(-)
Signature · 1 line
2.39.2