Skip to content

arm64: dts: ti: k3-j721s2: Mux fixups and eeprom misc

Nishanth Menon linux-arm-kernel linux-devicetree lkml stable 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest6 patches 4 repliesIn review

Changes from the cover letter

* Fixups to the wkup_pmx0 patch to limit stable tree to 6.3
* Fixups to Rpi header patch for mcu_i2c0 pinmux
* Additional patches for eeprom and wkup/mcu uarts.

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/6arm64: dts: ti: k3-j721s2: Fix wkup pinmux rangearch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi+87 -600 replies
2/6arm64: dts: ti: k3-am68-sk-base-board: Add pinmux for RPi Headerarch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts+76 -10 replies
3/6arm64: dts: ti: k3-am68-sk-base-board: Add uart pinmuxarch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts+26 -02 replies
4/6arm64: dts: ti: k3-am68-sk-som: Enable wakeup_i2c0 and eepromarch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi+22 -01 reply
5/6arm64: dts: ti: k3-j721s2-common-proc-board: Add uart pinmuxarch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts+22 -10 replies
6/6arm64: dts: ti: k3-j721s2-som-p0: Enable wakeup_i2c0 and eepromarch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi+22 -00 replies

Reviews trailers per patch

1 of 6 patches has a Reviewed-by or Acked-by of their own; the series has one for all of them.

PatchSinthu RajaUdit Kumar
SeriesR-b
1/6
2/6
3/6
4/6R-b
5/6
6/6

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/6] arm64: dts: ti: k3-j721s2: Mux fixups and eeprom misc

Hi,

This is an expansion of Sinthu's series[1] for J721s2, fixing a few aspects of his patches and adding uart, eeprom detection etc.

This set of changes picksup fixes seen in u-boot and else where an consolidates into kernel as the definitive device tree description

Testing logs: https://gist.github.com/nmenon/2acfc566d0b215fe941c42317d9ac955

Changes:
* Fixups to the wkup_pmx0 patch to limit stable tree to 6.3
* Fixups to Rpi header patch for mcu_i2c0 pinmux
* Additional patches for eeprom and wkup/mcu uarts.

-- Sinthu's series history:
Changes in V5[1]:
-Remove main padconfig split patch which is not required.

Changes in V4:
- Address review comments
* Update main and wakeup domain IO padconfig
* Correct the pinctrl node offsets as per the newly split wkup_pmx* and main_pmx* nodes.

Changes in V3:
- Add Fixes tag.

Changes in V2:
- Update commit description.
- Update the offset value to 0x194 as 0x190 is the last register of the IO PADCONFIG register set.

V1: https://lore.kernel.org/all/[email protected]/
V2: https://lore.kernel.org/lkml/[email protected]/T/
V3: https://lore.kernel.org/linux-arm-kernel/[email protected]/T/
V4: https://lore.kernel.org/lkml/[email protected]/
V5[1]: https://lore.kernel.org/linux-arm-kernel/[email protected]/

Nishanth Menon (4):
arm64: dts: ti: k3-am68-sk-base-board: Add uart pinmux
arm64: dts: ti: k3-am68-sk-som: Enable wakeup_i2c0 and eeprom
arm64: dts: ti: k3-j721s2-common-proc-board: Add uart pinmux
arm64: dts: ti: k3-j721s2-som-p0: Enable wakeup_i2c0 and eeprom

Sinthu Raja (2):
arm64: dts: ti: k3-j721s2: Fix wkup pinmux range
arm64: dts: ti: k3-am68-sk-base-board: Add pinmux for RPi Header

 .../boot/dts/ti/k3-am68-sk-base-board.dts     | 145 +++++++++++++++---
 arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi    |  22 +++
 .../dts/ti/k3-j721s2-common-proc-board.dts    |  99 +++++++-----
 .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     |  29 +++-
 arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi  |  22 +++
 5 files changed, 255 insertions(+), 62 deletions(-)
Signature · 1 line
2.40.0