Skip to content

rcar: Select the correct device tree

Detlev Casanova u-boot 2 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest3 patches 7 repliesIn review
  2. v12 patches 3 repliesSuperseded

Changes in v2 from the cover letter

* Also expose the board revision in sysinfo
* Set the dtb depending on board revision
* Move RCar board IDs definitions to sys_proto.h
* fix checkpatch.pl warnings

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3renesas: rcar3: Expose the board id in sysinfoarch/arm/mach-rmobile/include/mach/sys_proto.h drivers/sysinfo/rcar3.c+33 -121 reply
2/3renesas: rcar3: Expose the board revision in sysinfoarch/arm/mach-rmobile/include/mach/sys_proto.h drivers/sysinfo/rcar3.c+40 -261 reply
3/3renesas: rcar3: Load the correct device treeboard/renesas/ulcb/ulcb.c configs/rcar3_ulcb_defconfig+60 -05 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [PATCH v2 0/3] rcar: Select the correct device tree

The R-Car Starter Kit Premier(H3e WS3.0) uses the r8a779m1-ulcb.dtb. As u-boot can detect the board id and revision, let's use this to set the correct device tree for that board when using pxe.

Changes since v1:
* Also expose the board revision in sysinfo
* Set the dtb depending on board revision
* Move RCar board IDs definitions to sys_proto.h
* fix checkpatch.pl warnings

Detlev Casanova (3):
renesas: rcar3: Expose the board id in sysinfo
renesas: rcar3: Expose the board revision in sysinfo
renesas: rcar3: Load the correct device tree

 .../arm/mach-rmobile/include/mach/sys_proto.h | 21 +++++
 board/renesas/ulcb/ulcb.c                     | 59 ++++++++++++
 configs/rcar3_ulcb_defconfig                  |  1 +
 drivers/sysinfo/rcar3.c                       | 90 +++++++++++--------
 4 files changed, 133 insertions(+), 38 deletions(-)
Signature · 1 line
2.39.3