Skip to content

Add a driver for the Marvell 88Q2110 PHY

Stefan Eichenberger netdev 4 versions – Applied

Status from this message: This series was applied to netdev/net-next.git (main)

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v4 Latest5 patches 0 repliesApplied 5/5
  2. v35 patches 8 repliesSuperseded
  3. v24 patches 13 repliesSuperseded
Earlier versions · 1
VersionPostedPatchesRepliesStatus
v12 patches4 repliesSuperseded

Changes in v4 from the cover letter

- Move PHY id to include/linux/marvell_phy.h (Marek)
- Use PHY id ending with 0, gets masked (Andrew)

Patches in v4 All 5 applied

#Subject and filesSizeRepliesApplied
1/5net: phy: add registers to support 1000BASE-T1include/uapi/linux/mdio.h+17 -10 repliesApplied
2/5net: phy: c45: add support for 1000BASE-T1 forced setupdrivers/net/phy/phy-c45.c+10 -10 repliesApplied
3/5net: phy: c45: add a separate function to read BASE-T1 abilitiesdrivers/net/phy/phy-c45.c include/linux/phy.h+32 -130 repliesApplied
4/5net: phy: c45: detect the BASE-T1 speed from the ability registerdrivers/net/phy/phy-c45.c+8 -00 repliesApplied
5/5net: phy: marvell-88q2xxx: add driver for the Marvell 88Q2110 PHYdrivers/net/phy/Kconfig drivers/net/phy/Makefile drivers/net/phy/marvell-88q2xxx.c +1 more+271 -00 repliesApplied

Reviews trailers per patch

All 5 patches have a Reviewed-by or Acked-by.

PatchAndrew Lunn
1/5R-b
2/5R-b
3/5R-b
4/5R-b
5/5R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v4 thread

Cover letter [PATCH net-next v4 0/5] Add a driver for the Marvell 88Q2110 PHY

Add support for 1000BASE-T1 to the phy-c45 helper and add a first 1000BASE-T1 driver for the Marvell 88Q2110 PHY.

v4:
- Move PHY id to include/linux/marvell_phy.h (Marek)
- Use PHY id ending with 0, gets masked (Andrew)

v3:
- Read the BASE-T1 capabilities from the ability register (Andrew)
- Fix several missing return values (Francesco)
- Poll the reset bit to be sure the soft reset was done (Andrew)
- Fix reading the latched link status wrongly (Andrew/Russell)
- Remove probe function (Francesco)
- Add defines for Marvell specific registers (Andrew)
- Move the BASE-T1 ability reading to a separate function (Andrew)

v2:
- Use the same pattern in Kconfig as for 88X2222 (Andrew)
- Sort Kconfig and Makefile entries (Andrew)
- Add generic registers to mdio.h (Andrew)
- Move generic functionality to phy-c45.c (Andrew)
- Document where proprietary registers are used (Andrew)
- Remove unnecessary c45 check (Andrew)
- Remove cable tests which were not implemented (Andrew)
- Remove comma for terminator entry (Francesco)
- Sort include files (Francesco)
- Return phy_write_mmd value in soft_reset (Francesco)

Stefan Eichenberger (5):
net: phy: add registers to support 1000BASE-T1
net: phy: c45: add support for 1000BASE-T1 forced setup
net: phy: c45: add a separate function to read BASE-T1 abilities
net: phy: c45: detect the BASE-T1 speed from the ability register
net: phy: marvell-88q2xxx: add driver for the Marvell 88Q2110 PHY

 drivers/net/phy/Kconfig           |   6 +
 drivers/net/phy/Makefile          |   1 +
 drivers/net/phy/marvell-88q2xxx.c | 263 ++++++++++++++++++++++++++++++
 drivers/net/phy/phy-c45.c         |  63 +++++--
 include/linux/marvell_phy.h       |   1 +
 include/linux/phy.h               |   1 +
 include/uapi/linux/mdio.h         |  18 +-
 7 files changed, 338 insertions(+), 15 deletions(-)
 create mode 100644 drivers/net/phy/marvell-88q2xxx.c
Signature · 1 line
2.39.2