Skip to content

ti: k3-am642: Add daughtercard support

Roger Quadros u-boot 1 version NAK

Status from this message: NAK - Upstream kernel first please, we should get this change as part of

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest6 patches 5 repliesNAK

Patches in v1

#Subject and filesSizeRepliesApplied
1/6board: ti: am64x: Recognize AM64-HSEVMboard/ti/am64x/evm.c+6 -51 reply
2/6board: ti: am64x: Add HSE NAND card detection supportboard/ti/am64x/evm.c+177 -00 replies
3/6arm: dts: k3-am642: Sync main_i2c0 with kernelarch/arm/dts/k3-am642-evm-u-boot.dtsi arch/arm/dts/k3-am642-evm.dts+20 -113 replies
4/6arm: dts: k3-am642-r5-evm: Add I2C0 and Card detect GPIOsarch/arm/dts/k3-am642-r5-evm.dts+19 -01 reply
5/6arm: dts: k3-am642: Add I2C GPIO Expanderarch/arm/dts/k3-am642-evm-u-boot.dtsi arch/arm/dts/k3-am642-evm.dts+12 -00 replies
6/6configs: am64x_evm_a53_defconfig: Enable I2C GPIO driversconfigs/am64x_evm_a53_defconfig+4 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/6] ti: k3-am642: Add daughtercard support

Hi,

This series adds daughtercard detection support for am642-evm.

NAND card support is added.

cheers,
-roger

Roger Quadros (6):
board: ti: am64x: Recognize AM64-HSEVM
board: ti: am64x: Add HSE NAND card detection support
arm: dts: k3-am642: Sync main_i2c0 with kernel
arm: dts: k3-am642-r5-evm: Add I2C0 and Card detect GPIOs
arm: dts: k3-am642: Add I2C GPIO Expander
configs: am64x_evm_a53_defconfig: Enable I2C GPIO drivers

 arch/arm/dts/k3-am642-evm-u-boot.dtsi |  15 +-
 arch/arm/dts/k3-am642-evm.dts         |  28 ++++
 arch/arm/dts/k3-am642-r5-evm.dts      |  19 +++
 board/ti/am64x/evm.c                  | 188 +++++++++++++++++++++++++-
 configs/am64x_evm_a53_defconfig       |   4 +
 5 files changed, 238 insertions(+), 16 deletions(-)
Signature · 1 line
2.34.1