Skip to content

Disable HS400 for eMMC on Radxa ROCK 4 SBCs

Christopher Obbard linux-arm-kernel linux-devicetree linux-rockchip lkml 1 version Applied

Status from this message: Applied, thanks!

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 4 repliesApplied

Patches in v1 Applied

#Subject and filesSizeRepliesApplied
1/2arm64: dts: rockchip: Disable HS400 for eMMC on ROCK Pi 4arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi+2 -22 replies
2/2arm64: dts: rockchip: Disable HS400 for eMMC on ROCK 4C+arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts+1 -20 replies

Reviews trailers per patch

None of the 2 patches has a Reviewed-by or Acked-by.

PatchFolker Schwesinger
1/2T-b
2/2

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH v1 0/2] Disable HS400 for eMMC on Radxa ROCK 4 SBCs

There is some instablity with some eMMC modules on ROCK Pi 4 SBCs running in HS400 mode. This ends up resulting in some block errors after a while or after a "heavy" operation utilising the eMMC (e.g. resizing a filesystem). An example of these errors is as follows:

    [  289.171014] mmc1: running CQE recovery
    [  290.048972] mmc1: running CQE recovery
    [  290.054834] mmc1: running CQE recovery
    [  290.060817] mmc1: running CQE recovery
    [  290.061337] blk_update_request: I/O error, dev mmcblk1, sector 1411072 op 0x1:(WRITE) flags 0x800 phys_seg 36 prio class 0
    [  290.061370] EXT4-fs warning (device mmcblk1p1): ext4_end_bio:348: I/O error 10 writing to inode 29547 starting block 176466)
    [  290.061484] Buffer I/O error on device mmcblk1p1, logical block 172288
    [  290.061531] Buffer I/O error on device mmcblk1p1, logical block 172289
    [  290.061551] Buffer I/O error on device mmcblk1p1, logical block 172290
    [  290.061574] Buffer I/O error on device mmcblk1p1, logical block 172291
    [  290.061592] Buffer I/O error on device mmcblk1p1, logical block 172292
    [  290.061615] Buffer I/O error on device mmcblk1p1, logical block 172293
    [  290.061632] Buffer I/O error on device mmcblk1p1, logical block 172294
    [  290.061654] Buffer I/O error on device mmcblk1p1, logical block 172295
    [  290.061673] Buffer I/O error on device mmcblk1p1, logical block 172296
    [  290.061695] Buffer I/O error on device mmcblk1p1, logical block 172297

Disabling the Command Queue seems to stop the CQE recovery from running, but doesn't seem to improve the I/O errors. Until this can be investigated further, disable HS400 mode on the ROCK Pi 4 SBCs to at least stop I/O errors from occurring.

Christopher Obbard (2):
arm64: dts: rockchip: Disable HS400 for eMMC on ROCK Pi 4
arm64: dts: rockchip: Disable HS400 for eMMC on ROCK 4C+

 arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts | 3 +--
 arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi   | 4 ++--
 2 files changed, 3 insertions(+), 4 deletions(-)
Signature · 7 lines
2.40.1


_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip