Skip to content

clean up the FEC driver

Wei Fang lkml netdev 1 version Applied

Status from this message: This series was applied to netdev/net-next.git (main)

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 1 replyApplied 3/3

Patches in v1 All 3 applied

#Subject and filesSizeRepliesApplied
1/3net: fec: remove the remaining code of rx copybreakdrivers/net/ethernet/freescale/fec.h drivers/net/ethernet/freescale/fec_main.c+0 -450 repliesApplied
2/3net: fec: remove fec_set_mac_address() from fec_enet_init()drivers/net/ethernet/freescale/fec_main.c+0 -30 repliesApplied
3/3net: fec: remove unused members from struct fec_enet_privatedrivers/net/ethernet/freescale/fec.h+0 -30 repliesApplied

Reviews trailers per patch

None of the 3 patches has a Reviewed-by or Acked-by of their own; the series has one for all of them.

PatchSimon Horman
SeriesR-b
1/3
2/3
3/3

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH net-next 0/3] clean up the FEC driver

When reading the codes of the FEC driver recently, I found there are some redundant or invalid codes, these codes make the FEC driver a bit messy and not concise, so this patch set has cleaned up the FEC driver. At present, I only found these, but I believe these are not all, I will continue to clean up the FEC driver in the future.

Wei Fang (3):
net: fec: remove the remaining code of rx copybreak
net: fec: remove fec_set_mac_address() from fec_enet_init()
net: fec: remove unused members from struct fec_enet_private

 drivers/net/ethernet/freescale/fec.h      |  5 ---
 drivers/net/ethernet/freescale/fec_main.c | 46 -----------------------
 2 files changed, 51 deletions(-)
Signature · 1 line
2.25.1