Skip to content

patches used to enable u-boot video driver on raspberry pi 4B platform

Meng Li u-boot 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 1 replyIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2bcm2835: Add simiple-framebuffer for use with fkmsdrivers/video/bcm2835.c+3 -00 replies
2/2rpi: set the correct parameter for simple framebuffer nodeboard/raspberrypi/rpi/rpi.c+2 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/2] patches used to enable u-boot video driver on raspberry pi 4B platform

From: Meng Li <[email protected]>

There are 2 patches as bleow:
0001-bcm2835-Add-simiple-framebuffer-for-use-with-fkms.patch 0002-rpi-set-the-correct-parameter-for-simple-framebuffer.patch The first one is used to enable u-boot video driver. The second one is used to fix the wired display status on monitor.

Jason Wessel (1):
bcm2835: Add simiple-framebuffer for use with fkms

Meng Li (1):
rpi: set the correct parameter for simple framebuffer node

 board/raspberrypi/rpi/rpi.c | 2 ++
 drivers/video/bcm2835.c     | 3 +++
 2 files changed, 5 insertions(+)
Signature · 1 line
2.34.1