Skip to content

mlx5: Expose NIC temperature via hwmon API

Saeed Mahameed linux-hwmon netdev 2 versions – Applied

Status from this message: This series was applied to netdev/net-next.git (main)

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest2 patches 2 repliesApplied 2/2
  2. v12 patches 4 repliesSuperseded

Changes in v2 from the cover letter

- Remove internal tracker tags
- Remove sanitized mlx5 sensor names
- add HWMON dependency in the mlx5 Kconfig

Patches in v2 All 2 applied

#Subject and filesSizeRepliesApplied
1/2net/mlx5: Expose port.c/mlx5_query_module_num() functiondrivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h drivers/net/ethernet/mellanox/mlx5/core/port.c+2 -10 repliesApplied
2/2net/mlx5: Expose NIC temperature via hardware monitoring kernel APIdrivers/net/ethernet/mellanox/mlx5/core/Kconfig drivers/net/ethernet/mellanox/mlx5/core/Makefile drivers/net/ethernet/mellanox/mlx5/core/hwmon.c +6 more+463 -1411 replyApplied

Reviews trailers per patch

All 2 patches have a Reviewed-by or Acked-by of their own; the series has one for all of them.

PatchTariq ToukanGal PressmanSimon HormanGuenter Roeck
SeriesR-b
1/2R-b R-b
2/2R-b R-b A-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes. Scroll the table sideways for all 4 reviewers.

Read the v2 thread

Cover letter [PATCH net-next V2 0/2] mlx5: Expose NIC temperature via hwmon API

From: Saeed Mahameed <[email protected]>

V1->V2:
- Remove internal tracker tags
- Remove sanitized mlx5 sensor names
- add HWMON dependency in the mlx5 Kconfig

Expose NIC temperature by implementing hwmon kernel API, which turns current thermal zone kernel API to redundant.

For each one of the supported and exposed thermal diode sensors, expose the following attributes:
1) Input temperature.
2) Highest temperature.
3) Temperature label.
4) Temperature critical max value:
refers to the high threshold of Warning Event. Will be exposed as tempY_crit hwmon attribute (RO attribute). For example for ConnectX5 HCA's this temperature value will be 105 Celsius, 10 degrees lower than the HW shutdown temperature).
5) Temperature reset history: resets highest temperature.

Adham Faris (2):
net/mlx5: Expose port.c/mlx5_query_module_num() function net/mlx5: Expose NIC temperature via hardware monitoring kernel API

 .../net/ethernet/mellanox/mlx5/core/Kconfig   |   1 +
 .../net/ethernet/mellanox/mlx5/core/Makefile  |   2 +-
 .../net/ethernet/mellanox/mlx5/core/hwmon.c   | 418 ++++++++++++++++++
 .../net/ethernet/mellanox/mlx5/core/hwmon.h   |  24 +
 .../net/ethernet/mellanox/mlx5/core/main.c    |   8 +-
 .../ethernet/mellanox/mlx5/core/mlx5_core.h   |   1 +
 .../net/ethernet/mellanox/mlx5/core/port.c    |   2 +-
 .../net/ethernet/mellanox/mlx5/core/thermal.c | 114 -----
 .../net/ethernet/mellanox/mlx5/core/thermal.h |  20 -
 include/linux/mlx5/driver.h                   |   3 +-
 include/linux/mlx5/mlx5_ifc.h                 |  14 +-
 11 files changed, 465 insertions(+), 142 deletions(-)
 create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/hwmon.c
 create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/hwmon.h
 delete mode 100644 drivers/net/ethernet/mellanox/mlx5/core/thermal.c
 delete mode 100644 drivers/net/ethernet/mellanox/mlx5/core/thermal.h
Signature · 1 line
2.41.0