Skip to content

dwc general suspend/resume functionality

Frank Li imx linux-arm-kernel linux-devicetree linux-pci lkml 7 versions – Applied

Status from this message: Applied to controller/dwc, thanks!

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v12 Latest3 patches 8 repliesApplied
  2. v113 patches 7 repliesSuperseded
  3. v10 posting 2/23 patches 2 repliesSuperseded
Earlier versions · 4
VersionPostedPatchesRepliesStatus
v10 posting 1/23 patches0 repliesSuperseded
v9 posting 2/20 of 3 patches0 repliesSuperseded
v9 posting 1/23 patches4 repliesSuperseded
v83 patches0 repliesSuperseded

Patches in v12 Applied

#Subject and filesSizeRepliesApplied
1/3PCI: Add macro PCIE_PME_TO_L2_TIMEOUT_USdrivers/pci/pci.h+6 -00 replies
2/3PCI: dwc: Implement general suspend/resume functionality for L2/L3 transitionsdrivers/pci/controller/dwc/pcie-designware-host.c drivers/pci/controller/dwc/pcie-designware.h+99 -03 replies
3/3PCI: layerscape: Add power management support for ls1028adrivers/pci/controller/dwc/pci-layerscape.c+126 -94 replies

Reviews trailers per patch

All 3 patches have a Reviewed-by or Acked-by.

PatchManivannan Sadhasivam
1/3A-b
2/3A-b
3/3A-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v12 thread

Cover letter [PATCH v12 0/3] dwc general suspend/resume functionality

Change log
- Change from v11 to v12
Move exit_l2() to layerscape platform

- Change from v10 to v11
Fixed two missed dev_err message change base on Mani's feedback

- Change from v9 to v10
min change according to Mani's feedback
Add Mani's ACK tag

- Change from v8 to v9

- Change from v7 to v8
Add new patch to add common PCIE_PME_TO_L2_TIMEOUT_US define. timeout value using PCIE_PME_TO_L2_TIMEOUT_US.

- Chnage from v6 to v7
Remove local varible struct dw_pcie *pci = pcie->pci Change according to Manivannan's feedback
remove unused lut_off and lut_base
fixed 100 to 1000(for 1ms)
using dev_err for timeout
refine commit message
fix sleep value 100 (should be 1000 for 1ms). use dev_err when timeout

- Change from v5 to v6
change to NOIRQ_SYSTEM_SLEEP_PM_OPS to remove #ifdef PM_CONFIG refine commit message
change according to Manivannan's comments.
remove reduncate step dw_pcie_set_dstate()
return 0 when .pme_turn_off is zero
call host_deinit() in suspend
check .host_deinit and .host_init point before call.

- Change from v4 to v5

- Change from v3 to v4
change according to Manivannan's comments.

- change at v2 to v3
Basic rewrite whole patch according rob herry suggestion. put common function into dwc, so more soc can share the same logic.

Frank Li (2):
PCI: Add macro PCIE_PME_TO_L2_TIMEOUT_US
PCI: dwc: Implement general suspend/resume functionality for L2/L3
transitions

Hou Zhiqiang (1):
PCI: layerscape: Add power management support for ls1028a

 drivers/pci/controller/dwc/pci-layerscape.c   | 135 ++++++++++++++++--
 .../pci/controller/dwc/pcie-designware-host.c |  71 +++++++++
 drivers/pci/controller/dwc/pcie-designware.h  |  28 ++++
 drivers/pci/pci.h                             |   6 +
 4 files changed, 231 insertions(+), 9 deletions(-)
Signature · 1 line
2.34.1