at91: sam9x60-curiosity: Misc improvements
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
- v2 Latest5 patches 1 replyIn review
- v14 patches 8 repliesSuperseded
Changes in v2 from the cover letter
- reworded some commit messages
- reenabled CONFIG_SYSRESET and CONFIG_SYSRESET_AT91
- split up LED patch in two new patches
Patches in v2 No applies recorded yet
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/5 | configs: at91: sam9x60_curiosity: Sync both defconfig variantsconfigs/ | +14 | 0 replies | |
| 2/5 | configs: at91: sam9x60: Switch to new reset driverconfigs/ configs/ configs/ +2 more | +10 | 0 replies | |
| 3/5 | ARM: dts: at91: sam9x60-curiosity: Sync LED nodes from Linuxarch/ | +30 | 0 replies | |
| 4/5 | board: sam9x60-curiosity: Let LED subsystem init leds if enabledarch/ board/ | +36 | 0 replies | |
| 5/5 | ARM: dts: at91: sam9x60-curiosity: Sync gpio button from Linuxarch/ | +20 | 0 replies |
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.
Cover letter [PATCH v2 0/5] at91: sam9x60-curiosity: Misc improvements
Hei hei,
while working with the sam9x60-curiosity board I noticed some things still have rough edges on U-Boot shell for that device. With these patches (and some more config options enabled), the following commands now work as expected: reset, led, button.
The whole series is based on atmel/next.
Note: some things here might be useful to implement for other Microchip boards. However I currently only have this one board, and I'm not sure if this is a direction appreciated by Microchip? So you might see all this as suggestion.
See notes on patches for specific changes from v1 to v2 and below for summary of the changes.
Greets
Alex
v1 -> v2:
- reworded some commit messages
- reenabled CONFIG_SYSRESET and CONFIG_SYSRESET_AT91
- split up LED patch in two new patches
Alexander Dahl (5):
configs: at91: sam9x60_curiosity: Sync both defconfig variants
configs: at91: sam9x60: Switch to new reset driver
ARM: dts: at91: sam9x60-curiosity: Sync LED nodes from Linux
board: sam9x60-curiosity: Let LED subsystem init leds if enabled
ARM: dts: at91: sam9x60-curiosity: Sync gpio button from Linux
.../dts/at91-sam9x60_curiosity-u-boot.dtsi | 18 +++++++ arch/arm/dts/at91-sam9x60_curiosity.dts | 50 +++++++++++++++++++ .../sam9x60_curiosity/sam9x60_curiosity.c | 18 +++++++ configs/sam9x60_curiosity_mmc1_defconfig | 2 + configs/sam9x60_curiosity_mmc_defconfig | 17 ++++++- configs/sam9x60ek_mmc_defconfig | 2 + configs/sam9x60ek_nandflash_defconfig | 2 + configs/sam9x60ek_qspiflash_defconfig | 2 + 8 files changed, 110 insertions(+), 1 deletion(-)
base-commit: 0498ff933813932ff057cdc314ab46df4a596d06
Signature · 1 line
2.30.2