Skip to content

spi-cadence-quadspi: Introduce runtime_pm support

Dhruva Gole linux-arm-kernel linux-devicetree linux-spi lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 1 replyIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2arm64: dts: ti: k3-am62-main: PM fixes in the fss nodearch/arm64/boot/dts/ti/k3-am62-main.dtsi+2 -11 reply
2/2spi: spi-cadence-quadspi: add runtime pm supportdrivers/spi/spi-cadence-quadspi.c+29 -90 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/2] spi-cadence-quadspi: Introduce runtime_pm support

Abstract
********

This series aims to add runtime_pm [0] functionality to the cadence-qspi driver/IP. Prior to this, the driver had system suspend resume support which comes into picture only during system wide low power states like deep sleep / Suspend-to-RAM.

Now, with runtime_pm support we can finally allow this driver/controller to be clock gated/ suspended when it's not in active use. This helps the overall system to reduce it's power consumption without needing to resort to system wide low power modes.

As it turns out, the system suspend resume functionality that existed so far can be re-used as is even for runtime suspend resume, hence the actual implementations of those calls need not change.

Testing
*******

This series has been tested by me on a SK-AM625 [1] EVM by Texas Instruments.

I did a basic test to check if IP suspended by trying to access it's registers while suspended (got core dump) and then to check resume I read back data from it. Also used k3conf, a TI tool to check on the device status in K3 Family of SOCs.

I highly encourage other platforms and users of this driver to test these changes as it affects all those who use runtime_pm. For this, I have uploaded these changes on my github branch [2] which can be cloned and readily used.
For referring to how I tested, please refer to my logs [3]

Runtime PM usage
****************

The auto-suspend delay can be tweaked from the userspace using the following sysfs entry:

root@am62xx-evm:~# cat /sys/bus/platform/devices/fc40000.spi/power/autosuspend_delay_ms
2000

Other useful information can be obtained from the same folder,

root@am62xx-evm:~# cat /sys/bus/platform/devices/fc40000.spi/power/runtime_*

To disable runtime auto-suspend for this driver one can set autosuspend_delay_ms to -1

Note to maintainers
*******************

* Patch 1/2 should probably go via Nishant's / Vignesh's tree
* Patch 2/2 (RFT) can go via Mark's tree

Reference/Links
***************

[0] https://docs.kernel.org/power/runtime_pm.html
[1] https://www.ti.com/tool/SK-AM62
[2] https://github.com/DhruvaG2000/v-linux/tree/ospi_runtime_pm
[3] https://gist.github.com/DhruvaG2000/6aeeb2196caf8fbbe518c89037cb7548

Dhruva Gole (2):
arm64: dts: ti: k3-am62-main: PM fixes in the fss node
spi: spi-cadence-quadspi: add runtime pm support

 arch/arm64/boot/dts/ti/k3-am62-main.dtsi |  3 +-
 drivers/spi/spi-cadence-quadspi.c        | 38 ++++++++++++++++++------
 2 files changed, 31 insertions(+), 10 deletions(-)

base-commit: 47762f08697484cf0c2f2904b8c52375ed26c8cb

Signature · 7 lines
2.34.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel