Skip to content

phy: qcom-qmp-usb: fix initialization of PCS_USB

Adrien Thierry linux-arm-msm linux-phy 2 versions – Applied

Status from this message: Applied, thanks!

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest2 patches 4 repliesApplied
  2. v12 patches 4 repliesSuperseded

Changes in v2 from the cover letter

- Don't fallback to pcs for PCS_USB initialization (Dmitry Baryshkov)

Patches in v2 Applied

#Subject and filesSizeRepliesApplied
1/2phy: qcom-qmp-usb: initialize PCS_USB registersdrivers/phy/qualcomm/phy-qcom-qmp-usb.c+4 -02 replies
2/2phy: qcom-qmp-usb: split PCS_USB init table for sc8280xp and sa8775pdrivers/phy/qualcomm/phy-qcom-qmp-usb.c+15 -50 replies

Reviews trailers per patch

All 2 patches have a Reviewed-by or Acked-by.

PatchDmitry Baryshkov
1/2R-b
2/2R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v2 thread

Cover letter [PATCH v2 0/2] phy: qcom-qmp-usb: fix initialization of PCS_USB

This series attempts at making sure PCS_USB registers are properly initialized. I tested it on the sa8775p. AFAICT there's no noticeable change before/after the patch series: lsusb and dmesg output are the same. USB is still working properly. I don't know what those PCS_USB registers do exactly on the qmp PHY and I don't have access to the PHY datasheet, so it's hard for me to tell the impact of them being initialized vs not.

v1 -> v2:
- Don't fallback to pcs for PCS_USB initialization (Dmitry Baryshkov)

Adrien Thierry (2):
phy: qcom-qmp-usb: initialize PCS_USB registers
phy: qcom-qmp-usb: split PCS_USB init table for sc8280xp and sa8775p

 drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 24 +++++++++++++++++++-----
 1 file changed, 19 insertions(+), 5 deletions(-)
Signature · 7 lines
2.41.0


-- 
linux-phy mailing list
[email protected]
https://lists.infradead.org/mailman/listinfo/linux-phy