Skip to content

board: xilinx: zyqmp: add Beckhoff CX8200

Steffen Dirkwinkel u-boot 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest5 patches 9 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/5drivers: rtc: add rv3032 driverdrivers/rtc/Kconfig drivers/rtc/Makefile drivers/rtc/rv3032.c+345 -02 replies
2/5drivers/usb/dwc3: zynqmp: only free reset gpio if we have onedrivers/usb/dwc3/dwc3-generic.c+3 -11 reply
3/5xilinx: zynqmp: move fdt_addr so we can use devices with less memoryinclude/configs/xilinx_zynqmp.h+1 -11 reply
4/5xilinx: zynqmp: add Beckhoff CX8200arch/arm/dts/Makefile arch/arm/dts/zynqmp-beckhoff-cx8200.dts board/xilinx/zynqmp/zynqmp-beckhoff-cx8200/psu_init_gpl.c +1 more+2209 -15 replies
5/5xilinx: zynqmp: beckhoff cx8200: setup inner cache broadcastingboard/xilinx/zynqmp/zynqmp-beckhoff-cx8200/regs.init+1 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/5] board: xilinx: zyqmp: add Beckhoff CX8200

From: Steffen Dirkwinkel <[email protected]>

This adds support for the Beckhoff CX8200 series of industrial embedded PCs. There is some information about the device and features here:
https://www.beckhoff.com/en-en/products/ipc/embedded-pcs/cx8200-arm-cortex-a53/

We also add the rtc rv3032 driver from linux, as it is required for mac address loading, fix usb without reset gpios on zynqmp and move the fdt loadaddr to be compatible with less memory.

Steffen Dirkwinkel (5):
drivers: rtc: add rv3032 driver
drivers/usb/dwc3: zynqmp: only free reset gpio if we have one
xilinx: zynqmp: move fdt_addr so we can use devices with less memory
xilinx: zynqmp: add Beckhoff CX8200
xilinx: zynqmp: beckhoff cx8200: setup inner cache broadcasting

 arch/arm/dts/Makefile                         |    1 +
 arch/arm/dts/zynqmp-beckhoff-cx8200.dts       |  247 +++
 .../zynqmp-beckhoff-cx8200/psu_init_gpl.c     | 1960 +++++++++++++++++
 .../zynqmp/zynqmp-beckhoff-cx8200/regs.init   |    1 +
 configs/xilinx_zynqmp_virt_defconfig          |    2 +-
 drivers/rtc/Kconfig                           |   10 +
 drivers/rtc/Makefile                          |    1 +
 drivers/rtc/rv3032.c                          |  334 +++
 drivers/usb/dwc3/dwc3-generic.c               |    4 +-
 include/configs/xilinx_zynqmp.h               |    2 +-
 10 files changed, 2559 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm/dts/zynqmp-beckhoff-cx8200.dts
 create mode 100644 board/xilinx/zynqmp/zynqmp-beckhoff-cx8200/psu_init_gpl.c
 create mode 100644 board/xilinx/zynqmp/zynqmp-beckhoff-cx8200/regs.init
 create mode 100644 drivers/rtc/rv3032.c
Signature · 1 line
2.42.0