Add Additional Boards and Features to RGxx3
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
- v4 Latest7 patches 9 repliesIn review
- v37 patches 0 repliesSuperseded
- v24 patches 3 repliesSuperseded
Earlier versions · 1
| Version | Posted | Patches | Replies | Status |
|---|---|---|---|---|
| v1 | 3 patches | 6 replies | Superseded |
Changes in v4 from the cover letter
- Fixed a bug with else/else if logic for board detection (changed a second incorrect "if" to the proper "else if").
Patches in v4 No applies recorded yet
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/7 | board: rockchip: Refactor panel auto-detect codeboard/ | +74 | 1 reply | |
| 2/7 | spl: Add Kconfig options for ADCcommon/ drivers/ drivers/ | +9 | 0 replies | |
| 3/7 | rockchip: boot_mode: Allow rockchip_dnl_key_pressed() in SPLarch/ arch/ | +12 | 5 replies | |
| 4/7 | board: rockchip: Add Recovery Button for Anbernic RGxx3arch/ board/ configs/ +1 more | +30 | 0 replies | |
| 5/7 | rockchip: board: Add board_rng_seed() for all Rockchip devicesarch/ board/ | +32 | 1 reply | |
| 6/7 | board: rockchip: Add support for new boards to RGxx3board/ | +39 | 1 reply | |
| 7/7 | doc: board: anbernic: Update rgxx3 to add new boardsdoc/ | +14 | 1 reply |
Reviews trailers per patch
4 of 7 patches have a Reviewed-by or Acked-by.
| Patch | Kever Yang |
|---|---|
| 1/7 | R-b |
| 2/7 | |
| 3/7 | |
| 4/7 | |
| 5/7 | R-b |
| 6/7 | R-b |
| 7/7 | R-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH V4 0/7] Add Additional Boards and Features to RGxx3
From: Chris Morgan <[email protected]>
The RGxx3 is a pseudo-device for U-Boot that works for every Anbernic RGxx3 series device on the market. Add support for another series of very similar devices from Powkiddy.
Changes since V3:
- Fixed a bug with else/else if logic for board detection (changed a second incorrect "if" to the proper "else if").
Changes since V2:
- Modify the mach-rockchip level rockchip_dnl_key_pressed() so that we can also call it in SPL mode and eliminate the board specific function. This requires adding ADC support to SPL. Additionally, I had to change the regulator for the saradc to a fixed regulator and add GPIO and regulator support to SPL.
- Move the board specific board_rng_seed to the mach-rockchip level board file so that other rockchip boards with a hardware RNG can benefit. This should only be called if both the Rockchip hardware RNG as well as the rng seed functions are enabled.
- Add two new boards (the RG-ARC-D and RG-ARC-S). I removed the previous code review due to the extensive changes made.
Changes since V1:
- Update verbiage around function button to say "recovery" mode instead of calling it "maskrom" mode, which has a specific meaning. Also note that recovery function was done in a board specific manner to ensure it can run early.
- Update board level documentation for the RGxx3.
Chris Morgan (7):
board: rockchip: Refactor panel auto-detect code
spl: Add Kconfig options for ADC
rockchip: boot_mode: Allow rockchip_dnl_key_pressed() in SPL
board: rockchip: Add Recovery Button for Anbernic RGxx3
rockchip: board: Add board_rng_seed() for all Rockchip devices
board: rockchip: Add support for new boards to RGxx3
doc: board: anbernic: Update rgxx3 to add new boards
.../arm/dts/rk3566-anbernic-rgxx3-u-boot.dtsi | 11 + arch/arm/mach-rockchip/Makefile | 4 +- arch/arm/mach-rockchip/board.c | 32 +++ arch/arm/mach-rockchip/boot_mode.c | 11 +- board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c | 194 +++++++++++------- common/spl/Kconfig | 7 + configs/anbernic-rgxx3-rk3566_defconfig | 16 +- doc/board/anbernic/rgxx3.rst | 20 +- drivers/Makefile | 1 + drivers/adc/Makefile | 2 +- include/configs/anbernic-rgxx3-rk3566.h | 2 + 11 files changed, 210 insertions(+), 90 deletions(-)
Signature · 1 line
2.34.1