sunxi: add OrangePi Zero 3 board support
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
- v2 Latest3 patches 12 repliesIn review
- v13 patches 21 repliesSuperseded
Patches in v2 No applies recorded yet
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/3 | mtd: spi-nor: Add support for zBIT ZB25VQ128drivers/ drivers/ | +10 | 10 replies | |
| 2/3 | sunxi: H616: remove default AXP305 selectionconfigs/ configs/ drivers/ | +2 | 0 replies | |
| 3/3 | sunxi: H616: Add OrangePi Zero 3 board supportarch/ board/ configs/ | +38 | 0 replies |
Reviews trailers per patch
2 of 3 patches have a Reviewed-by or Acked-by.
| Patch | Jaehoon Chung | Mikhail Kalashnikov | Bob McChesney | Dragan Simic |
|---|---|---|---|---|
| 1/3 | R-b | |||
| 2/3 | R-b | |||
| 3/3 | T-b | T-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes. Scroll the table sideways for all 4 reviewers.
Cover letter [PATCH v2 0/3] sunxi: add OrangePi Zero 3 board support
A small update for the OrangePi Zero 3 support series. This fixes USB support, and upgrades the DRAM clock to 792, for better stability (as the other DRAM parameters were tailored to that frequency). I added the tags on the way.
Please test!
=================
The OrangePi Zero 3 is a small development board featuring the Allwinner H618 SoC. Compared to its predecessor OrangePi Zero 2, the new board uses LPDDR4 DRAM instead of DDR3 DRAM, and an X-Powers AXP313 PMIC instead of the AXP305.
U-Boot gained support for both LPDDR4 DRAM and the new PMIC just recently, so add a user for those features by adding a defconfig for the new board.
To make this work, patch 1/3 introduces support for zBIT SPI NOR flash chip, and patch 2/3 removes the default AXP305 PMIC selection when compiling for H616 SoCs.
Patch 3/3 then adds the defconfig. The DT was already synced from the Linux kernel repo a few weeks ago.
Cheers,
Andre
Changelog v1 .. v2:
- add tags
- set DRAM clock to 792 MHz (from the default 720 MHz)
- fix USB support by supplying USB VBUS enable GPIO
Andre Przywara (3):
mtd: spi-nor: Add support for zBIT ZB25VQ128
sunxi: H616: remove default AXP305 selection
sunxi: H616: Add OrangePi Zero 3 board support
arch/arm/dts/Makefile | 1 + board/sunxi/MAINTAINERS | 5 +++++ configs/orangepi_zero2_defconfig | 1 + configs/orangepi_zero3_defconfig | 32 ++++++++++++++++++++++++++++++++ configs/x96_mate_defconfig | 1 + drivers/mtd/spi/Kconfig | 5 +++++ drivers/mtd/spi/spi-nor-ids.c | 5 +++++ drivers/power/Kconfig | 1 - 8 files changed, 50 insertions(+), 1 deletion(-) create mode 100644 configs/orangepi_zero3_defconfig
Signature · 1 line
2.35.8