Allow link the it66121 display bridge driver as a lib
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest8 patches 53 repliesIn review
Patches in v1 No applies recorded yet
Reviews trailers per patch
2 of 8 patches have a Reviewed-by or Acked-by.
| Patch | Dmitry Baryshkov |
|---|---|
| 1/8 | R-b |
| 2/8 | R-b |
| 3/8 | |
| 4/8 | |
| 5/8 | |
| 6/8 | |
| 7/8 | |
| 8/8 |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH 0/8] Allow link the it66121 display bridge driver as a lib
From: Sui Jingfeng <[email protected]>
The goal is to make this driver usuable on non-DT based systems, while without introduce duplication and preserve code sharing. The first seven patch just doing trivial cleanup, the last patch try to solve the mentioned problem by allowing static linking. Tested on a ACPI-based platform:
$ dmseg | grep drm
ACPI: bus type drm_connector registered
loongson 0000:00:06.1: [drm] dc: 264MHz, gmc: 529MHz, gpu: 529MHz loongson 0000:00:06.1: [drm] Dedicated vram start: 0xe0030000000, size: 64MiB loongson 0000:00:06.1: [drm] Loongson VBIOS version: 0.3
loongson 0000:00:06.1: [drm] Loongson VBIOS: has 8 DCBs
loongson 0000:00:06.1: [drm] VRAM: 4096 pages ready
loongson 0000:00:06.1: [drm] GTT: 32768 pages ready
loongson 0000:00:06.1: [drm] lsdc-i2c0(sda pin mask=1, scl pin mask=2) created loongson 0000:00:06.1: [drm] lsdc-i2c1(sda pin mask=4, scl pin mask=8) created loongson 0000:00:06.1: [drm] DisplayPipe-0 has DVO-0 connector i2c 1-004c: IT66121 probed, chip id: 0x4954:0x612, revision: 1 loongson 0000:00:06.1: [drm] DisplayPipe-1 has IT66121@4c attached loongson 0000:00:06.1: [drm] Total 2 outputs
loongson 0000:00:06.1: [drm] registered irq: 40
[drm] Initialized loongson 1.0.0 20220701 for 0000:00:06.1 on minor 0 loongson 0000:00:06.1: [drm] fb0: loongsondrmfb frame buffer device
Sui Jingfeng (8):
drm/bridge: it66121: Use dev replace ctx->dev in the it66121_probe() drm/bridge: it66121: Add bridge_to_it66121() helper and use it drm/bridge: it66121: Add a helper function to read bus width drm/bridge: it66121: Add a helper function to get the next bridge drm/bridge: it66121: Add a helper function to read chip id drm/bridge: it66121: Add a helper to initialize the DRM bridge
structure
drm/bridge: it66121: Add another implementation for getting match data drm/bridge: it66121: Allow link this driver as a lib
drivers/gpu/drm/bridge/ite-it66121.c | 340 +++++++++++++++++++-------- include/drm/bridge/ite-it66121.h | 17 ++ 2 files changed, 258 insertions(+), 99 deletions(-) create mode 100644 include/drm/bridge/ite-it66121.h
Signature · 1 line
2.34.1