Add JH7110 MIPI DPHY TX support
Status from this message: Applied, thanks!
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
- v5 Latest2 patches 2 repliesApplied
- v42 patches 3 repliesSuperseded
- v32 patches 4 repliesSuperseded
Earlier versions · 2
| Version | Posted | Patches | Replies | Status |
|---|---|---|---|---|
| v2 | 2 patches | 1 reply | Superseded | |
| v1 | 2 patches | 7 replies | Superseded |
Changes in v5 from the cover letter
- Rebased on tag v6.9-rc4.
Patches in v5 Applied
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/2 | dt-bindings: phy: Add starfive,jh7110-dphy-txDocumentation/ | +68 | 0 replies | |
| 2/2 | phy: starfive: Add mipi dphy tx supportMAINTAINERS drivers/ drivers/ +1 more | +477 | 0 replies |
Reviews trailers per patch
All 2 patches have a Reviewed-by or Acked-by.
| Patch | Krzysztof Kozlowski | Changhuang Liang |
|---|---|---|
| 1/2 | R-b | |
| 2/2 | R-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH v5 0/2] Add JH7110 MIPI DPHY TX support
This patchset adds mipi dphy tx support for the StarFive JH7110 SoC. It is used to transfer DSI data. The series has been tested on the VisionFive 2 board.
change since v4:
- Rebased on tag v6.9-rc4.
patch 2:
-Drop shift macro definitions.
-Drop useless member variables of config array.
-Drop stf_dphy_set_reg() and stf_dphy_get_reg().
-Add readl_poll_timeout_atomic() for delay in stf_dphy_hw_reset(). -Rewrite register configure logic with FIELD_PREP()/FIELD_GET() and writel()/readl().
v4: https://patchwork.kernel.org/project/linux-phy/cover/[email protected]/
change since v3:
- Rebased on tag v6.8-rc6.
patch 2:
- Lower case for hex value.
- Replace bit shifts operation with macro definitions.
- Drop delay in stf_dphy_hw_reset().
- Change variable declarations order in stf_dphy_configure().
v3: https://patchwork.kernel.org/project/linux-phy/cover/[email protected]/
change since v2:
- Rebased on tag v6.8-rc3.
patch 2:
- Drop regulator operation.
v2: https://patchwork.kernel.org/project/linux-phy/cover/[email protected]/
changes since v1:
- Rebased on tag v6.7.
patch 1:
- Drop 'dphy_'prefix.
- Drop DSI reset.
- Drop unnecessary resets.
patch 2:
- Changed the commit message.
- Use dev_err_probe() and PTR_ERR() in probing.
- Drop DSI reset operation.
- Drop unnecessary resets operation.
- Add configs in array for full support of the module
- Changed 'void *io_addr' to 'void __iomem *io_addr'.
v1: https://patchwork.kernel.org/project/linux-phy/cover/[email protected]/
Shengyang Chen (2):
dt-bindings: phy: Add starfive,jh7110-dphy-tx
phy: starfive: Add mipi dphy tx support
.../bindings/phy/starfive,jh7110-dphy-tx.yaml | 68 +++ MAINTAINERS | 7 + drivers/phy/starfive/Kconfig | 10 + drivers/phy/starfive/Makefile | 1 + drivers/phy/starfive/phy-jh7110-dphy-tx.c | 459 ++++++++++++++++++ 5 files changed, 545 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/starfive,jh7110-dphy-tx.yaml create mode 100644 drivers/phy/starfive/phy-jh7110-dphy-tx.c
Signature · 7 lines
2.17.1 -- linux-phy mailing list [email protected] https://lists.infradead.org/mailman/listinfo/linux-phy