Skip to content

Enable SPCR table for console output on RISC-V

Sia Jee Heng linux-riscv lkml 2 versions – Applied

Status from this message: This patch was applied to riscv/linux.git (for-next)

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest1 patch 1 replyApplied 1/1
  2. v1 RFC1 patch 2 repliesSuperseded

Changes in v2 from the cover letter

- Added code to handle early_init_dt_scan_chosen_stdout().

Patches in v2 All 1 applied

#Subject and filesSizeRepliesApplied
1/1RISC-V: ACPI: Enable SPCR table for console output on RISC-Varch/riscv/Kconfig arch/riscv/kernel/acpi.c+12 -11 replyApplied

Reviews trailers per patch

The patch has a Reviewed-by or Acked-by.

PatchSunil V L
1/1R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v2 thread

Cover letter [PATCH v2 0/1] Enable SPCR table for console output on RISC-V

The ACPI SPCR code has been used to enable console output for ARM64 and X86. The same code can be reused for RISC-V. Furthermore, SPCR table is mandated for headless system as outlined in the RISC-V BRS Specification, chapter 6.

Changes in v2:
- Added code to handle early_init_dt_scan_chosen_stdout().

Sia Jee Heng (1):
RISC-V: ACPI: Enable SPCR table for console output on RISC-V

 arch/riscv/Kconfig       |  1 +
 arch/riscv/kernel/acpi.c | 12 +++++++++++-
 2 files changed, 12 insertions(+), 1 deletion(-)

base-commit: 0106679839f7c69632b3b9833c3268c316c0a9fc

Signature · 1 line
2.34.1