Skip to content

board: visionfive2: add pad drive strength config

Lukasz Tekieli u-boot 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 2 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2net: phy: motorcomm: configure pad drive strength registerdrivers/net/phy/motorcomm.c+130 -01 reply
2/2board: visionfive2: configure PHY pad drive strengthboard/starfive/visionfive2/spl.c+8 -01 reply

Reviews trailers per patch

All 2 patches have a Reviewed-by or Acked-by.

PatchLeo Yu-Chi Liang
1/2R-b
2/2R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/2] board: visionfive2: add pad drive strength config

gmac0 does not work correctly with the default settings of the pad drive strength. 100Mbit link does not work at all. This series fixes the issue by porting the pad drive strength register configuration from the Linux driver from commit 67a8976780858461b3c2d0dc501d207452543c53.

Lukasz Tekieli (2):
net: phy: motorcomm: configure pad drive strength register
board: visionfive2: configure PHY pad drive strength

 board/starfive/visionfive2/spl.c |   8 ++
 drivers/net/phy/motorcomm.c      | 130 +++++++++++++++++++++++++++++++
 2 files changed, 138 insertions(+)

--
2.39.2