Skip to content

Add support for multiple coherent memory regions

Howard Yen linux-iommu linux-usb lkml oe-kbuild oe-kbuild-all 5 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v5 Latest2 patches 5 repliesIn review
  2. v42 patches 2 repliesSuperseded
  3. v31 patch 11 repliesSuperseded
Earlier versions · 2
VersionPostedPatchesRepliesStatus
v21 patch5 repliesSuperseded
v11 patch5 repliesSuperseded

Changes in v5 from the cover letter

- Fix build break.
- Use of_property_count_u32_elems() instead of
of_property_count_elems_of_size().

Patches in v5 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2dma-coherent: add support for multi coherent rmems per devdrivers/base/core.c include/linux/device.h kernel/dma/coherent.c+64 -360 replies
2/2usb: host: xhci-plat: add support for multi memory regionsdrivers/usb/host/xhci-plat.c+18 -12 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v5 yet.

Read the v5 thread

Cover letter [PATCH v5 0/2] Add support for multiple coherent memory regions

In the system I'm working on, there is an always-on subsystem which includes a small size memory, and several functions need to run and occupy the memory from the small memory if they need to run on the always-on subsystem. These functions must allocate the memory from the small memory region, so that they can get benefit from the always-on subsystem. So the small memory is split for multiple functions which are satisfied with their generic use cases. But in specific use cases, like USB3 devices which support the stream trasnsfer or multiple devices connect to the host, they required more memory than their pre-allocated memory region. I tried to implement it in a generic way and propose this patch to give it the ability to get the memory from the other larger memory to solve the issue.

Changelog
--------------------------------------------
Changes in v5:
- Fix build break.
- Use of_property_count_u32_elems() instead of
of_property_count_elems_of_size().

Changes in v4:
- Add the driver where uses the multiple coherent memory regions.

Changes in v3:
- Re-org the members of struct dma_coherent_mem to avoid additional pointer arithmetics and the holes inside the structure.
- Use consistent naming of return value.
- Re-write the dev checking statement to be more clear.

Changes in v2:
- Replace the pointer(dma_mem) to a list_head(dma_mems) in the device structure and initialize the list_head in device_initialize().
- Modify the required changes in coherent.c.

Howard Yen (2):
dma-coherent: add support for multi coherent rmems per dev
usb: host: xhci-plat: add support for multi memory regions

 drivers/base/core.c          |  3 ++
 drivers/usb/host/xhci-plat.c | 19 +++++++-
 include/linux/device.h       |  5 +-
 kernel/dma/coherent.c        | 92 +++++++++++++++++++++++-------------
 4 files changed, 82 insertions(+), 37 deletions(-)
Signature · 1 line
2.44.0.278.ge034bb2e1d-goog