arm64: dts: ti: k3-am62-verdin: add sleep-moci support
Status from this message: I have applied the following to branch ti-k3-dts-next on [1].
Get series with b4
b4 am [email protected]Versions newest first
Patches in v1 Applied
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/2 | arm64: dts: ti: k3-am62-verdin: replace sleep-moci hog with regulatorarch/ | +16 | 1 reply | |
| 2/2 | arm64: dts: ti: k3-am62-verdin-dahlia: support sleep-mociarch/ | +22 | 1 reply |
Reviews trailers per patch
All 2 patches have a Reviewed-by or Acked-by.
| Patch | Francesco Dolcini |
|---|---|
| 1/2 | R-b |
| 2/2 | R-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH v1 0/2] arm64: dts: ti: k3-am62-verdin: add sleep-moci support
From: Stefan Eichenberger <[email protected]>
This patch series adds support for sleep-moci to the Verdin AM62 in combination with the Dahlia carrier board. sleep-moci is a GPIO that allows the system on module to turn off regulators that are not needed in suspend mode on the carrier board.
Commit ba9d3cd71f15 ("dt-bindings: usb: microchip,usb5744: Remove peer-hub as requirement") from linux-next is needed to make DTB_CHECK pass without peer-hub set for the hub on the usb1 interface.
Stefan Eichenberger (2):
arm64: dts: ti: k3-am62-verdin: replace sleep-moci hog with regulator
arm64: dts: ti: k3-am62-verdin-dahlia: support sleep-moci
.../boot/dts/ti/k3-am62-verdin-dahlia.dtsi | 22 +++++++++++++++++ arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi | 24 ++++++++++++------- 2 files changed, 38 insertions(+), 8 deletions(-)
Signature · 1 line
2.40.1