Skip to content

Add support to run against real target

Daniel Wagner linux-block linux-nvme 3 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v3 Latest3 patches 6 repliesIn review
  2. v2 RFC3 patches 4 repliesSuperseded
  3. v1 RFC10 patches 1 replySuperseded

Changes in v3 from the cover letter

- added support for previous configured target
- renamed nvme_nvme_target to _require_kernel_nvme_target
- use shorter redirect operator
- https://lore.kernel.org/all/[email protected]/

Patches in v3 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3nvme/rc: introduce remote target supportDocumentation/running-tests.md check tests/nvme/rc+92 -24 replies
2/3nvme/030: only run against kernel soft targettests/nvme/030 tests/nvme/rc+9 -00 replies
3/3contrib: add remote target setup/cleanup scriptcontrib/nvme_target_control.py contrib/nvmet-subsys.jinja2+252 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.

Read the v3 thread

Cover letter [PATCH blktests v3 0/3] Add support to run against real target

I've added a new hook so that the default variables can be configured via the script. This simple overwrite of the defaults allows to use external configured setups (there is some trickery involved as it's not possible to do it only once due to include orders). The upside of this approach is that we don't have to add more environment variables.

I've run blktests against a PowerStore. That worked fairly okay but there were some fallouts which is kind of expected at this stage:

# cat ~/.config/blktests/nvme_target_control.toml
[main]
skip_setup_cleanup=true
nvmetcli='/home/wagi/work/nvmetcli/nvmetcli'
remote='http://nvmet:5000'

[host]
blkdev_type='device'
trtype='tcp' hostnqn='nqn.2014-08.org.nvmexpress:uuid:1a9e23dd-466e-45ca-9f43-a29aaf47cb21' hostid='1a9e23dd-466e-45ca-9f43-a29aaf47cb21' host_traddr='10.161.16.48'

[subsys_0]
traddr='10.162.198.45'
trsvid='4420' subsysnqn='nqn.1988-11.com.dell:powerstore:00:f03028e73ef7D032D81E' subsys_uuid='3a5c104c-ee41-38a1-8ccf-0968003d54e7'

# NVME_TARGET_CONTROL=/root/blktests/contrib/nvme_target_control.py ./check nvme

nvme/002 (tr=tcp) (create many subsystems and test discovery) [not run]
nvme_trtype=tcp is not supported in this test
nvme/003 (tr=tcp) (test if we're sending keep-alives to a discovery controller) nvme/003 (tr=tcp) (test if we're sending keep-alives to a discovery controller) [passed]

    runtime    ...  15.397s
nvme/004 (tr=tcp) (test nvme and nvmet UUID NS descriptors)  [failed]
    runtime    ...  42.584s
    --- tests/nvme/004.out      2024-06-27 09:45:35.496518067 +0200
    +++ /root/blktests/results/nodev_tr_tcp/nvme/004.out.bad    2024-06-27 10:38:59.424409636 +0200
    @@ -1,3 +1,4 @@
     Running nvme/004
    -disconnected 1 controller(s)
    +No namespaces found
    +disconnected 13 controller(s)
     Test complete
nvme/005 (tr=tcp) (reset local loopback target)              [passed]
    runtime    ...  11.160s
nvme/006 (tr=tcp bd=device) (create an NVMeOF target)        [passed]
    runtime    ...  1.350s
nvme/008 (tr=tcp bd=device) (create an NVMeOF host)          [failed]
    runtime    ...  8.748s
    --- tests/nvme/008.out      2024-06-27 09:45:35.496518067 +0200
    +++ /root/blktests/results/nodev_tr_tcp_bd_device/nvme/008.out.bad  2024-06-27 10:39:23.624408817 +0200
    @@ -1,3 +1,4 @@
     Running nvme/008
    +UUID 3a5c104c-ee41-38a1-8ccf-0968003d54e7 mismatch (wwid eui.3a5c104cee4138a18ccf0968003d54e7)
     disconnected 1 controller(s)
     Test complete
nvme/010 (tr=tcp bd=device) (run data verification fio job)  [passed]
    runtime    ...  29.798s
nnvme/012 (tr=tcp bd=device) (run mkfs and data verification fio) [failed]
    runtime    ...  162.299s
    --- tests/nvme/012.out      2024-06-27 09:45:35.500518066 +0200
    +++ /root/blktests/results/nodev_tr_tcp_bd_device/nvme/012.out.bad  2024-06-27 10:42:38.008402238 +0200
    @@ -1,3 +1,6 @@
     Running nvme/012
    +fio: io_u error on file /mnt/blktests//verify.0.0: No space left on device: write offset=44917682176, buflen=4096
    +fio exited with status 1
    +4;fio-3.23;verify;0;28;0;0;0;0;0;0;0.000000;0.000000;0;0;0.000000;0.000000;1.000000%=0;5.000000%=0;10.000000%=0;20.000000%=0;30.000000%=0;40.000000%=0;50.000000%=0;60.000000%=0;70.000000%=0;80.000000%=0;90.000000%=0;95.000000%=0;99.000000%=0;99.500000%=0;99.900000%=0;99.950000%=0;99.990000%=0;0%=0;0%=0;0%=0;0;0;0.000000;0.000000;0;0;0.000000%;0.000000;0.000000;3508332;24662;6165;142251;5;19501;35.466984;172.426891;127;60177;2556.665370;1420.047447;1.000000%=1056;5.000000%=1548;10.000000%=1646;20.000000%=1777;30.000000%=1908;40.000000%=2072;50.000000%=2277;60.000000%=2441;70.000000%=2637;80.000000%=2932;90.000000%=3653;95.000000%=4554;99.000000%=8224;99.500000%=10027;99.900000%=14745;99.950000%=17956;99.990000%=39583;0%=0;0%=0;0%=0;418;60193;2592.427453;1433.177059;18632;44736;100.000000%;24704.690141;4469.952445;0;0;0;0;0;0;0.000000;0.000000;0;0;0.000000;0.000000;1.000000%=0;5.000000%=0;10.000000%=0;20.000000%=0;30.000000%=0;40.000000%=0;50.000000%=0;60.000000%=0;70.000000%=0;80.000000%=0;90.000000%=0;95.000000%=0;99.000000%=0;99.500000%=0;99.900000%=0;99.950000%=0;99.990000%=0;0%=0;0%=0;0%=0;0;0;0.000000;0.000000;0;0;0.000000%;0.000000;0.000000;5.627417%;9.681547%;711749;0;22200;0.1%;0.1%;0.1%;0.1%;100.0%;0.0%;0.0%;0.00%;0.00%;0.00%;0.00%;0.00%;0.00%;0.01%;0.12%;0.29%;0.43%;35.65%;56.04%;6.95%;0.47%;0.03%;0.01%;0.00%;0.00%;0.00%;0.00%;0.00%;0.00%;nvme0n1;0;1739486;0;0;0;4596624;4596624;100.00%
     disconnected 1 controller(s)
     Test complete

nvme/014 (tr=tcp bd=device) (flush a command from host) ^C^C^C

The flush test hanged forever but this could just be an outdated host kernel.

changes:
v3:
- added support for previous configured target
- renamed nvme_nvme_target to _require_kernel_nvme_target
- use shorter redirect operator
- https://lore.kernel.org/all/[email protected]/
v2:
- many of the preperation patches have been merged, drop them
- added a python script which implements the blktests API
- add some documentation how to use it
- changed the casing of the environment variables to upper case

v1:
- initial version
- https://lore.kernel.org/linux-nvme/[email protected]/

Daniel Wagner (3):
nvme/rc: introduce remote target support
nvme/030: only run against kernel soft target
contrib: add remote target setup/cleanup script

 Documentation/running-tests.md |  33 ++++++
 check                          |   4 +
 contrib/nvme_target_control.py | 181 +++++++++++++++++++++++++++++++++
 contrib/nvmet-subsys.jinja2    |  71 +++++++++++++
 tests/nvme/030                 |   1 +
 tests/nvme/rc                  |  65 +++++++++++-
 6 files changed, 353 insertions(+), 2 deletions(-)
 create mode 100755 contrib/nvme_target_control.py
 create mode 100644 contrib/nvmet-subsys.jinja2
Signature · 1 line
2.45.2