Skip to content

add driver for Synopsys Ethernet 10G device

Boon Khai Ng u-boot 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest1 patch 1 replyIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/1net: Add drivers for Sysnopsys Ethernet 10G devicedrivers/net/Kconfig drivers/net/Makefile drivers/net/dwc_eth_xgmac.c +2 more+1709 -01 reply

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH v1 0/1] add driver for Synopsys Ethernet 10G device

This driver support the Synopsys Designware Ethernet 10G IP block refer from the driver dwc_eth_qos.

The driver MAC register mapping is different between Synopsys QoS IP and Synopsys 10G IP, and thus new file is created meant for Sysnopsys 10G IP.

The dwc_eth_xgmac_socfpga.c is specific to a device family, the driver support the specific configuration used in Intel SoC FPGA Agilex5.

This driver is extensible for other device family to use.

Boon Khai Ng (1):
net: Add drivers for Sysnopsys Ethernet 10G device

 drivers/net/Kconfig                 |   18 +
 drivers/net/Makefile                |    2 +
 drivers/net/dwc_eth_xgmac.c         | 1165 +++++++++++++++++++++++++++
 drivers/net/dwc_eth_xgmac.h         |  298 +++++++
 drivers/net/dwc_eth_xgmac_socfpga.c |  226 ++++++
 5 files changed, 1709 insertions(+)
 create mode 100644 drivers/net/dwc_eth_xgmac.c
 create mode 100644 drivers/net/dwc_eth_xgmac.h
 create mode 100644 drivers/net/dwc_eth_xgmac_socfpga.c
Signature · 1 line
2.25.1