Skip to content

PCI: vmd: Enable PCI PM's L1 substates of remapped PCIe Root Port and NVMe

Jian-Hong Pan linux-pci lkml 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest1 of 4 patches 0 repliesNew

1 of 4 patches is in this archive. The cover letter announces 4.

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/4PCI: vmd: Set PCI devices to D0 before enable PCI PM's L1 substatesdrivers/pci/controller/vmd.c+9 -40 replies

Reviews trailers per patch

The patch has a Reviewed-by or Acked-by.

PatchKuppuswamy Sathyanarayanan
1/4R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/4] PCI: vmd: Enable PCI PM's L1 substates of remapped PCIe Root Port and NVMe

Notice the VMD remapped PCIe Root Port and NVMe have PCI PM L1 substates capability, but they are disabled originally.

Here is a failed example on ASUS B1400CEAE with enabled VMD:

10000:e0:06.0 PCI bridge: Intel Corporation 11th Gen Core Processor PCIe Controller (rev 01) (prog-if 00 [Normal decode])

    ...
    Capabilities: [200 v1] L1 PM Substates
        L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
        	  PortCommonModeRestoreTime=45us PortTPowerOnTime=50us
        L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2+ ASPM_L1.1-
        	   T_CommonMode=45us LTR1.2_Threshold=101376ns
        L1SubCtl2: T_PwrOn=50us

10000:e1:00.0 Non-Volatile memory controller: Sandisk Corp WD Blue SN550 NVMe SSD (rev 01) (prog-if 02 [NVM Express])

    ...
    Capabilities: [900 v1] L1 PM Substates
        L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1- ASPM_L1.2+ ASPM_L1.1- L1_PM_Substates+
                  PortCommonModeRestoreTime=32us PortTPowerOnTime=10us
        L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2+ ASPM_L1.1-
                   T_CommonMode=0us LTR1.2_Threshold=0ns
        L1SubCtl2: T_PwrOn=10us

According to "PCIe r6.0, sec 5.5.4", to config the link between the PCIe Root Port and the child device correctly:
* Ensure both devices are in D0 before enabling PCI-PM L1 PM Substates.
* Ensure L1.2 parameters: Common_Mode_Restore_Times, T_POWER_ON and LTR_L1.2_THRESHOLD are programmed properly on both devices before enable bits for L1.2.

Prepare this series to fix that.

Jian-Hong Pan (4):
PCI: vmd: Set PCI devices to D0 before enable PCI PM's L1 substates PCI/ASPM: Add notes about enabling PCI-PM L1SS to pci_enable_link_state(_locked) PCI/ASPM: Introduce aspm_get_l1ss_cap()
PCI/ASPM: Fix L1.2 parameters when enable link state

 drivers/pci/controller/vmd.c | 13 ++++++++----
 drivers/pci/pcie/aspm.c      | 41 ++++++++++++++++++++++++++++--------
 2 files changed, 41 insertions(+), 13 deletions(-)
Signature · 1 line
2.44.0