Skip to content

Add Remoteproc Support for TI's J722S SoCs

Beleswar Padhi linux-arm-kernel linux-devicetree lkml 5 versions – Applied

Status from this message: I have applied the following to branch ti-k3-dts-next on [1].

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v5 Latest2 patches 2 repliesApplied
  2. v42 patches 3 repliesSuperseded
  3. v32 patches 1 replySuperseded
Earlier versions · 2
VersionPostedPatchesRepliesStatus
v22 patches0 repliesSuperseded
v13 patches3 repliesSuperseded

Patches in v5 Applied

#Subject and filesSizeRepliesApplied
1/2arm64: dts: ti: k3-j722s-main: Add R5F and C7x remote processor nodesarch/arm64/boot/dts/ti/k3-j722s-main.dtsi+61 -00 replies
2/2arm64: dts: ti: k3-j722s-evm: Enable Inter-Processor Communicationarch/arm64/boot/dts/ti/k3-j722s-evm.dts+157 -01 reply

Reviews trailers per patch

All 2 patches have a Reviewed-by or Acked-by.

PatchUdit KumarAndrew Davis
1/2R-b R-b
2/2R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v5 thread

Cover letter [PATCH v5 0/2] Add Remoteproc Support for TI's J722S SoCs

Hello All,

The K3 J722S SoCs have one single-core Arm Cortex-R5F processor in each of the WAKEUP, MCU and MAIN voltage domain, and two C71x DSP subsystems in MAIN voltage domain. Thus, this series adds the DT Nodes for the remote processors to add support for IPC.

This series also enables IPC on the J722S-EVM platform based on the above SoC by adding the mailbox instances, shared memory carveouts and reserving the conflicting timer nodes (as they are used by remoteproc firmware).

v5: Changelog:
- Collected Reviewed-by tags from Udit and Andrew given in v4 version of patch ("arm64: dts: ti: k3-j722s-main: Add R5F and C7x remote processor nodes")

* Udit
1) Updated commit message to correctly reflect the host core name (A53 not A72) in patch "arm64: dts: ti: k3-j722s-evm: Enable Inter-Processor Communication"
2) Updated mbox DT node label and name to "mbox_wkup_r5_0" from "mbox_r5_0" for clarity in patch "arm64: dts: ti: k3-j722s-evm: Enable Inter-Processor Communication"

Link to v4:
https://lore.kernel.org/all/[email protected]/

v4: Changelog:
* Nishanth:
1) Fixed DT node properties order to put standard properties before vendor specific properties in patch "arm64: dts: ti: k3-j722s-main: Add R5F and C7x remote processor nodes"
2) Put "status" property at the end in extended DT nodes and preceded child nodes with a single blank line wherever applicable in patch "arm64: dts: ti: k3-j722s-evm: Enable Inter-Processor Communication" following kernel DTS coding style.

Link to v3:
https://lore.kernel.org/all/[email protected]/

v3: Changelog:
1) Reserved conflicting Timer Nodes in k3-j722s-evm.dts file to avoid remotecore boot failures.

Link to v2:
https://lore.kernel.org/all/[email protected]/

v2: Changelog:
1) Addressed Andrew's comments to refactor remotecore nodes into k3-j722s-main.dtsi file.
2) Squashed Patch 2 and 3 from V1 into Patch 2 in V2 as they were doing the same logical thing.
3) The DTBs check warnings from V1 are automatically fixed after a dt-binding patch[0] was merged in linux-next.

Link to v1:
https://lore.kernel.org/all/[email protected]/

[0]: https://lore.kernel.org/all/[email protected]/

Apurva Nandan (2):
arm64: dts: ti: k3-j722s-main: Add R5F and C7x remote processor nodes
arm64: dts: ti: k3-j722s-evm: Enable Inter-Processor Communication

 arch/arm64/boot/dts/ti/k3-j722s-evm.dts   | 157 ++++++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-j722s-main.dtsi |  61 +++++++++
 2 files changed, 218 insertions(+)
Signature · 1 line
2.34.1